10 Best Wen 4208

10 Best Wen 4208

Wen 4208. We found more to the list of product, including some flaws. In this article, we will give you information so that you will learn about the analysis of list of products so you can get a better view of each product.

Our editors research, and recommend the best products; you can learn more about our review process here. Primeareviews earns a commission through the affiliate links at no additional cost to you.


Bestseller No. 1
WEN 3403 2-Horsepower 1,500 CFM 16-Amp Woodworking Dust Collector with 50-Gallon Collection Bag and Mobile Base
61 Consumer Reviews
WEN 3403 2-Horsepower 1,500 CFM 16-Amp Woodworking Dust Collector with 50-Gallon Collection Bag and Mobile Base
  • Attach up to two tools at a time with the dual 4-inch air inlets
  • Vertical collection bag holds up to 50 gallons of debris and wood chips
  • 16-amp motor creates over 1,500 CFM of dust extracting power
  • Includes mobile base with four swivel casters along with a two-year warranty
  • NOTE: requires a NEMA 5-20R 20-amp outlet with a 25A circuit breaker (see images for reference)
Bestseller No. 2
WEN JT833H 10-Amp 8-Inch Spiral Benchtop Jointer with Extendable Table
49 Consumer Reviews
WEN JT833H 10-Amp 8-Inch Spiral Benchtop Jointer with Extendable Table
  • Spiral cutterhead system utilizes 16 staggered HSS blades for an ultra fine finish
  • Features a spacious 33-by-8-inch table with support arms that extend up to 51 inches
  • Remove 0 to 1/8 of an inch of material with each pass
  • Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees
Bestseller No. 3
WEN 4214 12-Inch Variable Speed Drill Press,Orange
2,417 Consumer Reviews
WEN 4214 12-Inch Variable Speed Drill Press,Orange
  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2"
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch
Bestseller No. 4
WEN JT630H 10-Amp 6-Inch Spiral Benchtop Jointer
98 Consumer Reviews
WEN JT630H 10-Amp 6-Inch Spiral Benchtop Jointer
  • Spiral cutterhead system utilizes 12 staggered HSS blades for an ultra fine finish
  • Features a spacious 30-by-6-inch table
  • Remove 0 to 1/8 of an inch of material with each pass
  • Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees
Bestseller No. 5
WEN 6559 6-Inch 10-Amp Corded Benchtop Jointer with Filter Bag and Depth Scale
191 Consumer Reviews
WEN 6559 6-Inch 10-Amp Corded Benchtop Jointer with Filter Bag and Depth Scale
  • Features a spacious 6-1/4 x 28-1/2 inch table and a two-blade 6-1/8 inch cutterhead
  • 10-amp motor provides up to 20,000 cuts per minute anywhere from 0 to 1/8 of an inch in size
  • Onboard depth scale makes for easy adjustments to the depth of cut
  • Adjustable 20-3/4 x 4-1/2 inch fence bevels up to 45 degrees in either direction
  • Includes a push stick, a push block, an adjustable 2-1/2-inch dust chute, a dust filter bag, and a two-year warranty
Bestseller No. 6
WEN 4212T 5-Amp 10-Inch Variable Speed Benchtop Drill Press with Laser
35 Consumer Reviews
WEN 4212T 5-Amp 10-Inch Variable Speed Benchtop Drill Press with Laser
  • Features a 5-amp induction motor, a 10-inch swing, and a 2-inch spindle travel
  • Adjust the mechanical variable speed anywhere from 530 to 3100 RPM
  • Digital speed readout displays current RPM of the machine for maximum precision
  • Includes a laser, adjustable depth stop, beveling 8 by 7.5-inch work table, 1/2-inch capacity keyed chuck, a chuck key with onboard storage, and a two-year warranty
  • Measures in at 13.2 by 19.3 by 33.9 inches in size with a weight of 57 pounds
Bestseller No. 7
WEN 3421 3.2-Amp 8' by 12' Variable Speed Mini Benchtop Wood Lathe
1,125 Consumer Reviews
WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe
  • Perfect for pens, bowls, cups, chess pieces, and other small workpieces
  • Fits workpieces up to 12 inches long and 8 inches wide
  • 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes
  • Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM
  • Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests
Bestseller No. 8
WEN 4206T 2.3-Amp 8-Inch 5-Speed Benchtop Drill Press
88 Consumer Reviews
WEN 4206T 2.3-Amp 8-Inch 5-Speed Benchtop Drill Press
  • Features a 2.3A induction motor, an 8-inch swing, and a 2-inch spindle travel
  • Includes a 1/2-inch keyed chuck and onboard key storage
  • Operates at 5 different speeds: 750, 1100, 1500, 2100, or 3200 RPM
  • 6.5 by 6.5 inch height adjustable worktable bevels up to 45 degrees in each direction
  • Measures in at 23 inches tall with a 7 by 11-inch base
Bestseller No. 9
WEN 4208T 2.3-Amp 8-Inch 5-Speed Benchtop Drill Press
7,464 Consumer Reviews
WEN 4208T 2.3-Amp 8-Inch 5-Speed Benchtop Drill Press
  • Features a 2.3A induction motor, an 8-inch swing, and a 2-inch spindle travel
  • Includes a 1/2-inch keyed chuck and onboard key storage
  • Operates at 5 different speeds: 740, 1100, 1530, 2100, or 3140 RPM
  • 6.5 by 6.5 inch height adjustable worktable bevels up to 45 degrees in each direction
  • Measures in at 23 inches tall with a 7 by 11-inch base
SaleBestseller No. 10
JET JWL-1221VS, 12'x21' Variable-Speed Woodworking Lathe (719200)
469 Consumer Reviews
JET JWL-1221VS, 12"x21" Variable-Speed Woodworking Lathe (719200)
  • CONVENIENT CONTROLS: Easy-to-reach controls and digital readout. Recommended Circuit Size (Amps)- 10
  • OPTIMAL SPEED: Choose from three speed ranges (60-900/110-1,800/220-3,600)
  • INNOVATIVE DESIGN: Ratchet-style belt tension system (patent pending)
  • HANDY STORAGE: Includes a tool storage caddy on each end of the machine
  • ADDED SAFETY: Removable yellow On/Off safety key
  • DIRECTIONAL CONTROL: Smooth transitions when changing from forward to reverse

New releases on Amazon

New
WEN 3962T 3.5-Amp 10-Inch Two-Speed Band Saw with Stand and Worklight, Black
2,008 Consumer Reviews
WEN 3962T 3.5-Amp 10-Inch Two-Speed Band Saw with Stand and Worklight, Black
  • 3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide
  • Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size
  • Spacious 14-1/8 x 12-1/2 inch cast aluminum work table bevels up to 45 degrees
  • Operates at two speeds of either 1520 or 2620 FPM
  • Includes a 2-year warranty, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI)
New
WEN 4214T 12 in. Variable Speed Drill Press
32 Consumer Reviews
WEN 4214T 12 in. Variable Speed Drill Press
  • Features a 5-amp induction motor, a 12-inch swing, and a 3-1/8-inch spindle travel
  • Adjust the mechanical variable speed anywhere from 580 to 3200 RPM
  • Digital speed readout displays current RPM of the machine for maximum precision
  • Includes a Class IIIA 2.5mW laser, overhead light, adjustable depth stop, table roller extension, beveling 9-1/2 by 9-1/2-inch work table, 5/8-inch capacity keyed chuck, a chuck key with onboard storage, and a two-year warranty
  • Measures in at 16.8 by 13.5 by 36.6 inches in size with a weight of 85 pounds
New
BILT HARD 6.6-Amp 13 Inch Drill Press, 16-Speed Benchtop Drill Press with Vise, 5/8' B16 Chuck, CSA Certified
451 Consumer Reviews
BILT HARD 6.6-Amp 13 Inch Drill Press, 16-Speed Benchtop Drill Press with Vise, 5/8" B16 Chuck, CSA Certified
  • Powerful Drill Press: 39*16.14*9.45 inches, weight: about 76 lbs. 13-1/4 inch swing, 3-1/8 inch spindle travel, 7/64" to 5/8-inch keyed chuck B16, 6.6A induction motor, which is mighty enough to drill through metal, wood, plastics, and other materials for both the job and the garage.
  • 16 Adjustable Speeds: Adjustable depth stop and variable speeds from 220-3600 RPM allow you to target in the exact speed that works for your project, it does the job more conveniently and precisely than a handheld drill.
  • Flexible Worktable: The worktable can bevel 45 degree left and right for angled drilling, with 11.41in. diameter. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective work-holding.
  • Stable Construction: The metal part of the drill press consist of steel to ensure durability and accurate drilling, BILT HARD has a warranty of 90 days since purchase returning for replacement or refund..
  • Package Includes: Comes with a drill press, 5/8" keyed chuck & key, hex wrenches, tools for assembly. Benchtop Drill press Height from the Floor to the top: 39 inch
New
WEN 4212T 5-Amp 10-Inch Variable Speed Benchtop Drill Press with Laser
35 Consumer Reviews
WEN 4212T 5-Amp 10-Inch Variable Speed Benchtop Drill Press with Laser
  • Features a 5-amp induction motor, a 10-inch swing, and a 2-inch spindle travel
  • Adjust the mechanical variable speed anywhere from 530 to 3100 RPM
  • Digital speed readout displays current RPM of the machine for maximum precision
  • Includes a laser, adjustable depth stop, beveling 8 by 7.5-inch work table, 1/2-inch capacity keyed chuck, a chuck key with onboard storage, and a two-year warranty
  • Measures in at 13.2 by 19.3 by 33.9 inches in size with a weight of 57 pounds
New
WEN WB4723T 48-Inch Workbench with Power Outlets and Light
965 Consumer Reviews
WEN WB4723T 48-Inch Workbench with Power Outlets and Light
  • Perfect for woodworkers, mechanics, or anyone else in need of reliable organization
  • Features two drawers, upper and lower storage shelves, and a pegboard for easy organization
  • Enamel-coated table top provides a spacious non-marring 220-pound capacity work surface
  • Includes three built-in 13-amp power outlets and an overhead fluorescent light
  • Measures in at 62 inches tall with a 25 by 48-inch footprint
New
WEN 3959T 2.5-Amp 9-Inch Benchtop Band Saw, Black
2,999 Consumer Reviews
WEN 3959T 2.5-Amp 9-Inch Benchtop Band Saw, Black
  • 2.5 amp motor rotates the blade up to 2500 feet per minute
  • Create cuts up to 3-1/2 inches deep and 9 inches wide
  • Uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in size
  • Spacious 12-1/4 x 11-7/8 inch work table bevels up to 45 degrees
  • Includes a 1/4-inch-wide blade, a 2-1/2 inch dust port, a rip fence, a miter gauge and a 2-year warranty
New
WEN 4206T 2.3-Amp 8-Inch 5-Speed Benchtop Drill Press
88 Consumer Reviews
WEN 4206T 2.3-Amp 8-Inch 5-Speed Benchtop Drill Press
  • Features a 2.3A induction motor, an 8-inch swing, and a 2-inch spindle travel
  • Includes a 1/2-inch keyed chuck and onboard key storage
  • Operates at 5 different speeds: 750, 1100, 1500, 2100, or 3200 RPM
  • 6.5 by 6.5 inch height adjustable worktable bevels up to 45 degrees in each direction
  • Measures in at 23 inches tall with a 7 by 11-inch base
New
Drill Chuck Fits - Wen 4208 - Replacement Drill Chuck - 1/2" Heavy Duty Drill Chuck - Made In The USA
  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment.
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance.
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance.
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments.
  • EASY, SECURE INSTALLATION: This drill chuck is easy to install. It will ensure the performance and maintain your machine life.
New
1/32"- 5/8" JT 33 Mount Super Heavy Duty Keyless Drill Press Chuck.
  • Heavy duty design, suitable for CNC Lathe/milling, drill press, and heavy duty hand tools.
  • High precision, high gripping force, high reliability and stability.
  • Self-tightening key-less feature.
  • Special quenching treated key parts increases durability.
  • We provide a worry-free 30-day warranty and friendly customer service. If you have any questions, please feel free to contact us, we are happy to solve it for you!
New
1 Pcs Replacement V Belt Compatible with Wen 8" 5 Speed Drill Press 4208 - QML237 | #YY37R
  • You will receive 1 Pcs Replacement V Belt Compatible With Wen 8" 5 Speed Drill Press 4208
  • Condition: New
  • Model: 4208
  • Brand new replacement V Belt for WEN 8" 5 Speed Drill Press model 4208.
  • Quantity: 1 pcs
10 Best Wen 4208
Scroll to top