Stainless Steel Light Brackets

Stainless Steel Light Brackets. We do the research ourselves by analyzing reviews and ratings from customers, to help you purchase wiser to avoid buyer’s remorse. please choose them wisely

Table of Contents show

Our list of the Stainless Steel Light Brackets


United Pacific (2) Single Stainless Steel Brackets/Fits 6" Oval LED Stop Turn Tail Lights

 out of stock
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • Misc. Auto Parts
  • Misc. Auto Parts
  • Misc. Auto Parts
  • Misc. Auto Parts
  • Misc. Auto Parts

United Pacific 20397 Oval Stainless Light Bracket w/Flange - 4 Hole

 out of stock
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • Oval Light Bracket
  • Available in Stainless Steel
  • Excellent for commercial rigs with additional rear lighting requirement
  • Package Dimension : 33.2 inches L x 2.0 inches W x 4.1 inches H

Grand General 81392 Stainless Steel Mounting Bracket for Single 4" Light

 out of stock
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • 6 inches length x 5-7/8 inches width x 1-3/8 inches diameter
  • Fits one standard 4 inches round light with grommet (not included)
  • The bracket allows you to customize with your choice of light and grommet
  • Stainless steel
  • Sold as each

Rustark 48 Pcs U Clip Holder Set with T5 T8 T10 Stainless Steel Lampholder Mounting Support Lamp Bracket for LED Light Fluorescent Tube Bulb

 out of stock
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • 【What you Get】The Fluorescent Light Bracket contains 3 size of Y clip holder: T5, T8,T10, 16 pcs each size, coming with 48 pcs 304 Stainless steel screws, totally 96 pcs. Various size of lamp holders meet your different need of household decoration,
  • 【Stainless Steel Material】Made of stainless steel, hardness, anti-corrosion and anti-rust.Smooth edge without any burr, good-looking and long service time.
  • 【Easy to Use】Stable and easy to install, thread mounting design. Not need to special tool for installation. You just need to apply screwdriver with self tapping sheet metal screw to install clip. The led lights then are securely held in place with the u clips.
  • 【Work Great】Great for keeping the bulbs from sagging in the center and secure them well, keeping your security. Suitable for all voltage. Widely applied in Household and Commercial Lighting.
  • 【Reliable After-sale Service】If you have any questions about our products or any problems with your packages, please feel free to contact us. We will reply you within 24 hours and we will try our best to solve the problems until you are satisfied.

KNS Accessories KA0710 Stainless Steel Bent Arm Tail Light Bracket For 1938-1956 Ford Truck, Model A Lights, Street Rods, Hot Rods, Passenger Side, 1 Pack

$34.98  in stock
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • Superior quality OEM reproduction & highly polished stainless steel
  • Also accepts Model A and 1932-1936 Ford tail lights
  • Can also be used on trailers and custom applications
  • Bent arm feature for extra clearance
  • Sold as each

Heavy-Duty 304 Stainless Steel Deck Torch Mount, for 3/4" and 1" OD Pole Torch/Light Pole Bases and Brackets on Outdoor Fixed Railings, Maximum Deck Space Saving (2 Set, 3/4in)

$25.99  in stock
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • HIGH QUALITY MATERIAL: High strength 304 Stainless Steel Deck Railing Torch Mounting Bracket, Suitable for Torch / Light pole fixed to the Railing Post, Can safely hold up your Torch or Light Pole. Provide more space for your deck or patio to use, Make your Deck Safe, Spacious and Neat.
  • ROBUST AND SAFE: Torch Mount Bracket is Made of 304 Stainless Steel Casting exterior Black high temperature powder coating, Strong, Durable, Never rust, it will not be like plastic after the wind and rain erosion peeling or corrosion, to provide you with the safest security.
  • APPLICATION: Standard 3/4" O.D. torch poles or light poles (applicable range: 3/4" ≥ 5/8").
  • SIZE SPECIFICATION: L2.32" * W2.12" * H1" Weight: 0.6LB
  • SET: Divided into the upper and lower two Accessories as a set, With stainless steel self-tapping screws, Can be installed immediately.

RIGID INDUSTRIES D-Series Stainless Steel L Bracket Kit: Light Mounting Accessories

$21.83  in stock
3 new from $21.83
Free shipping
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • DURABLE DESIGN: Our L Bracket Kit is made of sturdy stainless steel and covered with a UV-resistant powder coat. Whether you face rain or shine, dirt or asphalt, or anything else the elements can throw at you, our mount is built to last.
  • KEEPS YOUR HARDWARE SECURE: Your accessories are your investment, so you need something secure to hold them. Our bracket kit is built to keep your RIGID accessories, such as your lightbars, safely in place, no matter where you go.
  • EASY ASSEMBLY: Our L-Bracket kit is built with easy assembly in mind. Hook your hardware up with ease in a few simple steps, without sacrificing the security and safety of your investment.
  • TAILORED FOR YOUR HARDWARE: Our L-Bracket kit fits RIGID Industries hardware such as the D-Series, Radiance Pod, and 2x2 Scene accessories. Please check your specifications to see what mounts are best for your equipment.
  • MADE IN THE USA: Our products are designed, made, and serviced right here in the USA. We are proud to offer premium quality products, keeping costs fair and upfront.

Partsam 2Pcs Amber Truck Trailer ID Light Bar 9 LED 3-lamp Front Clearance Identification Light Bar Amber Clearance Marker Light Strip Bar with Stainless Steel Brackets Sealed Waterproof

$17.49  in stock
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • Partsam (2 x Amber ) Waterproof Identification Light Bar for trailers trucks etc, STAINLESS STEEL black base; LED identification light bar for trailer applications more than 80" wide.
  • Three replaceable 3-LED lights ID bar Universal for 12V Vehicles: Trucks and trailers as travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, motorhome etc.
  • Sealed, waterproof; Surface mount, three-light, 3-LEDs each light, totally 9LEDs, Amber Lens Amber Light.
  • EAST TO INSTALL: The light contains a single lead wire for power and is grounded through the mounting hardware. (Anyone of the three screws is the Negative and Red wire is the Positive end)
  • Size: 363mm x 30mm x 29mm (14.3'' x 1.18'' x 1.1''); Hole distance: 215mm (8.46''); Installation scews are included.

GG Grand General 81759 3-3/4 X 3-1/2 X 5-3/8 Inches Stainless Steel Medium Z Light Bracket

$13.99  in stock
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • Stainless steel bracket only

Led Light Bar Mounting Brackets,2PCS Universal Adjustable Clamp Piller Holder Led Work Light Bar Mount Bracket 304 Stainless Steel Piller Hood for Off Road Jeep Truck SUV Installing Without Drilling

$12.99  in stock
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • ★ Anti-Slip Design: The Led Light Bar mounting brackets are made of 304 Stainless Steel, the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint.can ensure absolute anti-rust,anti-corrosion.
  • ★ No-Drilling and Stable Design: The Mount Bracket Clamp Holder can be used to install almost all LED Light Pods.No any damage to the car surface paint. It can achieve 60 degree horizontal adjustment and 180 degree vertical adjustment. The Mount Brackets Stainless Steel Piller Hood are installed without drilling.
  • ★ Tight and Stability & Installation: 3 pcs fixing screw and anti-slip teeth enough to tight the mounting bracket firmly on the car cover tightly, the lamp also be firmly fixed. Universal mounting bracket using, can install it directly in the car's front hood.
  • ★ Wide Application: It can be used to install almost all LED Light Bar. This damage-free mounting bracket can be used for all car hoods — off-road, truck,ambulance,fire-engine,police vehicle,forklift,excavator,road roller, wagon,pickup,automobile,sedan,saloon,ATV,UTV,SUV and so on.
  • ★ Warranty & Package:2PCS Mounting Brackets;4 x Allen wrench;10PCS x Screws;100% risk free satisfaction guarantee; 365 Days Money Back Guarantee; 24 hours online heartfelt service. If you have anything, please feel free to contact us.We will be happy to solve it

LED Light Bar Mounting Bracket,Kevariy Stainless Steel Universal Adjustable Clamp Holder A Pillar Hood LED Work Light Pod Mount Brackets for Car Offroad Excavator Truck SUV 4x4

$12.99  in stock
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • Great Function -- Mount your LED lights with these brackets if there's no custom bracket for your vehicle. Doesn't vibrate or rattle at highway speeds.
  • Easily Adjustable in directions -- 60°horizontal adjustment and 180°vertical adjustment make sure your light is at the exact lighting direction and at a perfect lighting angle. The mounting brackets fix the light bars firmly on the mounts, and keeping the lights from swinging.
  • High Quality Material -- The mount brackets are made of durable 304 stainless steel, protecting itself well from corrosion and rust in bad weather conditions including rainy days and storms.
  • Universal Compatibility - LED Pod Mounting Bracket Clamps apply to most cars, off road Vehicles,trucks, Mining, wranglers, pickups, SUV (not for ATV/UTV),Boating, Farming and Heavy Equipment. Light Hood mounts can used to mount most LED pods, work lights,ditch Light, spotlights/fog lights/driving lights or light bars,DRL etc. As only the max limit of the clamp board thickness on vehicle is within 7.5mm.
  • Anti-slip and Protective Design - No drilling is required, just clamp the pillar holder and tighten up. The surface of the Hood Mount Clamp directly contacting the font cover of the car is covered by anti-slip teeth and rubber pad to make sure a firm installation, protecting your car paint from being damaged.

Chelhead Led Light Bar Mounting Brackets, 2PCS Stainless Steel Universal Pillar Hood led Work Light bar Mount Brackets Clamp Holder for Jeep Truck SUV Truck Sedan Hatchback Wagon Without Drilling

$12.59  in stock
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • No-Drilling Needed Design: Led light bars or led pods can be added without drilling hole on your beloved vehicle,5pcs Screws whose Dia is 0.1inch are enough to tight the light with the car cover tightly
  • Anti-Slip Design: the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint
  • Anti-Rust Design:The mount brackets are made of 304 stainless steel and the surface covered with rubber anti-rust paint, can ensure absolute anti-rust, anti-corrosion. Their high quality guarantees that they can be used in bad weather conditions including rainy days and storms
  • Wide Application: This damage-free mounting bracket can be used for all car hoods or any surface within 0.3 inch in thickenss and 0.6 inch in width ,(not for ATV and UTV).Suitable for any mounting brackets of off-road lights, Led pod lights, led fog lights, Auxilary driving lights LED work lights, Dual / Single/ TripleLED light bar, etc.
  • Package & Warranty: 2 x stainless steel brackets,3 x Allen wrench (Not including lights)

Universal LED Light Bar Mounting Brackets A Pillar Hood Work Light Clamp Holder Mount 304 Stainless Steel for Car Offroad Jeep Truck SUV 4x4 2PCS

$12.29  in stock
1 used from $10.72
Free shipping
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • Add More Lights Without Drilling - With Samman-Shop light bar mounting brackets, you can add more lights on your beloved vehicle without drilling any holes in the bodywork
  • Adjustable & Sturdy - The light bar hood bracket has 360°horizontal adjustment and 180°vertical adjustment for the best light angle you want. Made of 304 stainless steel, the mounting brackets are anti-rust, sturdy and powerful, fixing the light bars firmly on the mounts, and keeping the lights from swinging
  • Anti-slip & Protective Design - The surface of the brackets directly contacting the font cover of the car is covered by anti-slip rubber, anti-rust, anti-corrosion, protecting your car paint from being damaged
  • Universal Application - Universal light bar hood bracket apply to most cars, trucks, jeeps, pickups, SUV (not for ATV/UTV). Compatible with most LED, HID, halogen spotlights/fog lights/driving lights or light bars,DRL etc
  • Package & Warranty - 2* light bar mounting brackets, 4*Allen wrench. 12 months warranty guaranteed

Led Light Bar Mounting Brackets 2pcs Universal Hood Led Work Light Bar Mount Bracket Clamp 304 Stainless Steel Pillar Holder for Jeep Truck SUV Offroad Hatchback Wagon Installing Without Drilling

$12.22  in stock
1 used from $10.67
Free shipping
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • 【No-Drilling and Stable Design】The Mount Bracket Clamp Holder can be used to install almost all LED Light Pods.No any damage to the car surface paint. The Mount Brackets Stainless Steel Piller Hood are installed without drilling.
  • 【Anti-Slip & Anti-Rust Design】The Led Light Bar mounting brackets are made of 304 Stainless Steel, the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint.Ensure absolute anti-rust, anti-corrosion. Their high quality guarantees that they can be used in bad weather conditions including rainy days and storms.
  • 【Tight and Stability & Installation】5 pcs fixing screw and anti-slip teeth enough to tight the mounting bracket firmly on the car cover tightly, the lamp also be firmly fixed. Universal mounting bracket using, can install it directly in the car's front hood.
  • 【Wide Application】This damage-free mounting bracket can be used for all car hoods-off-road, truck,ambulance,fire-engine,police vehicle,forklift,excavator,road roller, wagon,pickup,automobile,sedan,saloon,ATV,UTV,SUV and so on.
  • 【Warranty & Package】2PCS Mounting Brackets;3 x Allen wrench;10PCS x Screws;100% risk free satisfaction guarantee; 365 Days Money Back Guarantee; 24 hours online heartfelt service. If you have anything, please feel free to contact us.We will be happy to solve it.

GLOBLED Universal LED Pods Light Mounts A Pillar Hood LED Light Bar Mounting Bracket Stainless Steel Mount for Off Road Jeep Truck SUV 2PCS

$11.99  in stock
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • LONG SERVICE TIME: The universal led pods mounts are made of high quality 304 stainless steel, which is rust resistance, corrosion resistance, the durable steel construction allows the mounts sturdy enough to support the weight of a led pods.
  • STAY FIRMLY ON YOUR HOOD: Anti-skid teeth at the top of the mounting bracket add friction and keep your led pods from swinging from side to side, non-slip rubber piece at the bottom allows your bracket to bite firmly onto your hood, you don’t worry about the small size of the bracket that won't properly hold your light bar to the hood.
  • ADJUSTABLE ANGLE: The led light bar mounts can be adjusted up and down for 180 degree, left and right for 360 degrees, you can adjust the best lighting angle as you want.
  • NEVER BLOCK YOUR VIRW: With these mounts bracket, you can add a long led light bar, or 2 led pods, auxiliary lamps on your hood, the small bracket sits low on your hood so it will never block your view while adding more lights.
  • UNIVERSAL FITMENT: This light bar mount are universal fit for Jeep, pickup, SUV, 4x4, trucks, the opening of the bracket are 8mm, you can clip it to any panel less than 8mm thick.

GG Grand General 33354 1-5/8 X 2-3/8 X 1-1/4 Inches Stainless Steel Heavy Duty U Light and Mirror Bracket

$9.99  in stock
Amazon.com
as of May 11, 2022 2:52 pm

Features

  • Material: Heavy duty 11.5 gauge stainless steel
  • Sold by each

As an Amazon Associate, We earn a small commission from qualifying purchases at no added cost to you.

New products list:

Last update on 2022-05-01 / Affiliate links / Images from Amazon Product Advertising API


Last updated on May 11, 2022 2:52 pm

As an Amazon Associate, We earn a small commission from qualifying purchases at no added cost to you.

What to consider before purchasing the Stainless Steel Light Brackets.

For a few countries like the United States of America, the customers prefer to purchase many varieties of products from Amazon.
Amazon supplies a variety of products with credible platform.
Buying form Amazon is like buying directly from the manufacturer.

Amazon.com works as a third-party and tied with manufacturers worldwide.
Amazon describes Stainless Steel Light Brackets products with a clear explanation provided by its manufacturer. These information can help shoppers make the right decision easier.

The guide provides information about the specifications of the Stainless Steel Light Brackets you want, such as its pros, features, size, function, and brand.
If shoppers want a Stainless Steel Light Brackets with any specific features, purchasing from Amazon is the best location or platform.
A list of products will appear on your laptop or monitor or Android phone as soon as you type in the features you prefer.

Choosing The Right Stainless Steel Light Brackets

1. Select the right spec. Browse through the category at Amazon, and you will see a whole host of specifications.
As a useful shortcut, just look at the prices. It will often tell you which products are more reliable or durable or powerful than others. It helps to know a little bit about what you are dealing with.

2. Look at customer satisfaction. See which products has the best rating. The best rating (usually between 0-5 or 0-10 scale) can help you understand how the product performed according to customer’s review.

3. Check the brand or manufacturer score. Less known manufacturer or brand tends to provide lesser quality product. Overtime, customers will provide feed backs which product performed the best.

4. Customer reviews. It would be the most important factor to consider. Customers leave feedback regarding their experience with the best Stainless Steel Light Brackets they purchased from Amazon.
Every single review posted, it will help you to know whether the best Stainless Steel Light Brackets you want to buy good or bad.

We hope our recommendation can help.

———————————-

PrimeaReviews is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
As an Amazon Associate, We earn a small commission from qualifying purchases at no added cost to you.