Skip to content

Stabilus Lift O Mat 448847

Stabilus Lift O Mat 448847. We do the research ourselves by analyzing reviews and ratings from customers, to help you purchase wiser to avoid buyer’s remorse. please choose them wisely

Table of Contents show

Our list of the Stabilus Lift O Mat 448847

2
Lift-O-Mat Gas Springs Silver, Pair
9.4

2 Truck Upfitters 14" Gas Props (13.98" Extended, 8.5" comp, 40 lbs of Press ea) Compatible with are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!

 out of stock
Amazon.com
as of June 14, 2022 8:49 am

Features

  • CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
  • Truck Upfitters Pair of 40 pound (each) gas struts. 13.98" extended length and 8.5" compressed length. This size of door shock absorber is for medium weight rear or side camper shell doors. Each canopy shock has 40 lbs of pressure, for a total of 80 lbs of pressure. Please note that this does not mean that it can lift something that is 80 lbs. the typical hinged-style door weight for this prop is approximately 50-87 lbs, including the weight of the camper shell locks and keys.
  • These do not fit all truck caps / camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
  • Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
  • Equivalent to Suspa # c16-09461 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!

2Pcs Gas Struts 20 Inch 20 lbs Prop Lift Springs Rod Heavy Duty Tool Box Lid Top RV Pair by Motion18

 out of stock
Amazon.com
as of June 14, 2022 8:49 am

Features

  • 【Specifications】Open Length: 20 inches; compressed 12 inches Stroke Length: 8 inches;Rod Diameter: 6mm || Force: per 20 pound,set 40 pound.
  • 【Scope of application】Mostly used on travel trailer door, RV door, motorhome door, compartment door, etc..;NOTE: If the lid weight is less than 16lbs or more than 22 pounds, please choose other pressure struts!!!
  • 【Tips used】Use a pole and bathroom scale to weigh the position where you will install the air column, usually 30%-50% away from the hinge. This will give you a good weight index, and then choose the right pillar.
  • 【Installation】The package contains 2 pillars and 4 ball studs, compatible with 10 mm ball sockets. Do not try to squeeze by hand, otherwise the pillars will be damaged.
  • 【Our Commitment】If you have any questions or are not satisfied or need an installation/use guide, please contact us via email or click "Ask the seller".

2 Truck Upfitters 16" Gas Props (15.7" ext, 9.4" Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!

 out of stock
Amazon.com
as of June 14, 2022 8:49 am

Features

  • CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
  • Truck Upfitters Pair of 55 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys.
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
  • Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
  • Compatible with Suspa # c16-23994 & compatible with Stabilus # 025657 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!

Lift-O-Mat Gas Springs Silver, Pair

$42.25
$39.30
 in stock
4 new from $39.30
Amazon.com
as of June 14, 2022 8:49 am

Features

  • Effortless opening of doors and lids. Softer and quieter closing. Smooth motion and stopping.
  • Secure holding in open and closed positions. Easy to mount/install. Maintenance free.
  • Compact and attractive design. Opens to 90 Degrees. One pair does one door.
  • Maximum door height 24"

Qty (2) 10mm Steel Claw End Lift Supports 20" Extended x 15lbs

$37.80  in stock
Amazon.com
as of June 14, 2022 8:49 am

Features

  • This listing includes 2 Lift Supports for Multi Purpose Applications.
  • Extended Length from Center Mount to Center Mount is 20.0 in.
  • High Quality Supports, designed to last, to OEM Standards.
  • Installs easy with no special tools required.
  • Compatible with the following OEM Numbers: sx200p15S10, SX200P15S10

2 Truck Upfitters 12" Gas Props (12.2" ext, 7.5" comp, 40 lbs ea) for are Snugtop Leer Camper Doors & ONLY Aluminum Weatherguard ONLY Toolboxes. Measurement REQ'D! Incl 4 Ball mounts!

$29.99  in stock
Amazon.com
as of June 14, 2022 8:49 am

Features

  • CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
  • Truck Upfitters Pair (2 total) of 40 pound (each) gas struts. 12.2" extended length and 7.5" compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 40 lbs of pressure, for a total of 80 lbs of pressure. Please note that this does not mean that it can lift something that is 80 lbs. the typical hinged-style door weight for this prop is approximately 50-70 lbs, including the weight of the camper shell locks and keys.
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
  • Equivalent to Suspa #C16-11028, Stabilus #19068, or Weatherguard 7009-2PK . Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors & awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, other toolbox struts, etc. These gas shock lift supports CAN'T be compressed by hand. They MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position.
  • NOT FOR STEEL TOOLBOXES- WILL NOT HOLD UP LID. Fit most Weatherguard ALUMINUM truck bed toolboxes ONLY, models 121-0-01, 121-5-01, 123-0-01, 123-5-01, 127-0-01, 127-5-01, 131-0-01, 131-5-01, 137-0-01, 137-5-01, 147-0-01, 147-5-01, 154-0-01, 154-5-01. Compatible with many truck canopy types, including LEER, ARE, Century, Snugtop, and ATC tops, & many other brands that utilize gas shocks / gas springs / gas lifts. Compatible with many gas lift brands, including stabilus, lift o mat, & Suspa.

C1608054 20" Gas Prop Spring Strut 20 inch 100 Lb Per Shock C16-08054 for Camper Shell RV Bed Tonneau Cover Storage Box Basement Door Floor Hatch Window Lift Struts (Applicable Lid Weight 85-110LBs)

$26.99  in stock
Amazon.com
as of June 14, 2022 8:49 am

Features

  • ✅ ARANA 20 inch Gas Struts C1608054 Lift Supports -- 2Pcs Set Force 100 Pounds 445N Gas Shocks , most SUITABLE support weight for 2 STRUTS is 85 lbs - 110 lbs, this means if your project lid is between 85 pounds and 110 pounds, this 100LB gas strut set is SUITABLE!
  • ✅ ARANA 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054; measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly!
  • ✅ C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc.;Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!
  • ✅ ARANA C1608054 100 lb Lift Supports -- Customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc; Very Strong, do not buy them for the lid weight less than 80 pounds;
  • ✅100% Satisfaction Service -- 18 Months Support comes with every ARANA product; If any questions before purchasing or dissatisfactions after purchasing or need installing/using guide, welcome to click "ASK SELLER" besides your order from ARANA for immediate assistance!

Qty(2) BOXI 4419 Universal Lift Supports Struts Extended Length: 14.50 Inches, Compressed Length: 9.25 Inches, Force: 35 Lbs. 10mm ball socket Shocks 4419

$24.99  in stock
2 new from $24.99
1 used from $11.80
Free shipping
Amazon.com
as of June 14, 2022 8:49 am

Features

  • Extended Length: 14.50 Inches
  • Compressed Length: 9.25 Inches
  • Force: 156N = 35 Lbs.
  • End Fitting: Ball Socket U Band (Nylon)=10mm=3/8"=.39"
  • *** IMPORTANT*** TO VERIFY FITMENT. Please See Product Description, BOXI Auto Parts is THE MANUFACTURER and THE ONLY RESELLER of BOXI Lift Support ON Amazon.

BOXI 2 Pcs Gas Charged Universal Lift Supports Struts Shocks Springs Dampers Extended Length 17.13 inches, Compressed Length 10.43 inches, 34 lbs Force, 10mm Ball Sockets 6906

$24.59  in stock
2 new from $24.59
Free shipping
Amazon.com
as of June 14, 2022 8:49 am

Features

  • Extended Length 17.13 inches
  • Compressed Length 10.43 inches
  • Force (lbs) 34.00, ext.ser.num 151N, 10mm Ball Sockets
  • LifeTime Limited Warranty On All Our Lift Supports
  • BOXI Auto Parts is THE MANUFACTURER and THE ONLY RESELLER of BOXI Lift Support ON Amazon. *** IMPORTANT*** TO VERIFY FITMENT. Please See Product Description Below or Contact Us and Provide THE YEAR / MAKE / MODEL OF YOUR CAR.

BOXI 2pcs Universal Lift Supports Extended Length 10 Inches, Compressed Length 6.75 Inches, Froce 51 LBS, 4672, 8196142, SL1-50-1

$23.99  in stock
2 new from $23.59
Amazon.com
as of June 14, 2022 8:49 am

Features

  • Extended Length: 10.00 Inches
  • Compressed Length: 6.75 Inches
  • Force: 227N = 51 Lbs.
  • End Fitting: Eyelet Hole=10.2mm=13/32"=.402"
  • *** IMPORTANT*** TO VERIFY FITMENT. Please See Product Description, BOXI Auto Parts is THE MANUFACTURER and THE ONLY RESELLER of BOXI Lift Support ON Amazon.

Maxpow C16-06874 C1606874 17" Gas Prop 40 Lbs Per Prop, Force Per Set 80 Lbs, Camper Rear Window Tonneau Cover Lift Supports Struts 2pcs C1606874

$23.89  in stock
2 new from $23.89
Free shipping
Amazon.com
as of June 14, 2022 8:49 am

Features

  • Interchange Part Number: C16-06874, SG359011, C1606874, WGS-534
  • Camper Rear Window, Tonneau Cover Lift Supports Struts
  • Specification: Extended Length: 17.13 Inches, Compressed Length: 10.75 Inches, Force: 178N = 40 Lbs.
  • Quality: Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature.
  • Attention: Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports.

Qty (2) BOXI Gas Charged Universal Lift Supports Extended Length 19.70 inches, Compressed Length 11.75 inches, 65 lbs Force, 10mm Ball Socket 4248

$23.09  in stock
2 new from $23.09
Free shipping
Amazon.com
as of June 14, 2022 8:49 am

Features

  • Extended Length 19.70 inches
  • Compressed Length 11.75 inches
  • Force (lbs) 65.00, ext.ser.num 289N
  • End Description: Ball Socket U Band (Nylon)=10mm=3/8"=.39"
  • BOXI Auto Parts is THE MANUFACTURER and THE ONLY RESELLER of BOXI Lift Support ON Amazon. *** IMPORTANT*** TO VERIFY FITMENT. Please See Product Description Below or Contact Us and Provide THE YEAR / MAKE / MODEL OF YOUR CAR.

Qty(2) BOXI SG459003 4037 Universal Lift Supports Gas Struts Shocks Springs Dampers Extended Length 10 inches/Compressed Length 6.75 inches / 60lbs Force / 10.2mm (13/32") Eyelet Hole ends

$21.99  in stock
2 new from $21.99
Free shipping
Amazon.com
as of June 14, 2022 8:49 am

Features

  • Extended Length: 10.00 inches (measured between the ball fitting centre)
  • Compressed Length: 6.75 inches (measured between the ball fitting centre)
  • Each Strut Force (lbs) 60.00, ext.ser.num 267 N
  • End Fitting: Eyelet Hole=10.2mm=13/32"=.402"
  • IMPORTANT NOTE-Please check the description or use the year / make / model drop down bar and interchangeable part numbers to confirm the compatibility before purchasing. If you don't make sure whether this item fit your vehicles, please message us.

RV Designer G21, Gas Prop Door Support, 20 inch, 10 lb. Load Capacity, Exterior Hardware, regular

$21.78  in stock
69 new from $15.08
1 used from $15.22
Free shipping
Amazon.com
as of June 14, 2022 8:49 am

Features

  • Commonly used on RV entry doors
  • Replace your gas prop by matching its length and force as close as possible
  • One gas prop per package, 20 inch extended length, 10 lbs force
  • If there are 2 props, replace them both to keep door feet balanced

C16-22331 C16-15208 16 inch 45 Lbs Gas Struts Spring Shocks 15.7inch 45lbs for ARE Topper Leer Cap Pickup Truck Cover Camper Window Shell Door, Set of 2 (15.7" extended size)

$26.99
$20.99
 in stock
Amazon.com
as of June 14, 2022 8:49 am

Features

  • ✅ 16inch 45LB Gas Prop Shocks - 2Pcs Set 16" Lift Struts, Force 45lbs (200N) Per Shock, Extended Length A [in]: 15.70, Compressed Length B [in]: 9.40, Stroke C [in]: 6.30, End Fittings: 10mm Nylon Ball Sockets; Interchange part no.: C1615208 C16-15208.NOTE: If the lid weight is less than 35lbs or more than 45 pounds, please choose other pressure struts!!!
  • ✅ C1622331 Gas Spring Struts - Most suitable SUPPORT Weight is between 35 pounds to 45 pounds; customers usually use them on ARE Topper Truck Cap Camper Shell Leer Cap Pickup Truck Cover Camper Window Shell, etc.
  • ✅ C1615208 45 Pounds Lift Supports - If you want to install them on DIY builds, you need to buy mounting brackets; if you install them as the OEM replacement struts, just use a screwdriver to remove the old set and then install the new set ; Note: Lift Supports couldn't be COMPRESSED by hands before installing!!!
  • ✅ Gas Shocks for A.R.E. Topper - 2 × Struts, 4 × ball studs, 4 × washers, 4 × nuts, 1 × installation guide included in each package; if any parts missing, quality problem or need more guide on instruction, please click ASK SELLER for in-time solving!
  • ✅ Gas Struts for Camper Shell - 18 Months Replacement/Refund Service Plus Lifetime Technical Support, once any quality problems or installation/using problems, Click ASK SELLER besides your order from us and let us solve your problem!

Front Load Washer Door Prop, Magnetic Washing Machine Door Holder, Keep Washer Door Open, Flexible Prop Fits Most Washing Machines

$11.99
$10.99
 in stock
Amazon.com
as of June 14, 2022 8:49 am

Features

  • Must Accessory for Front Load Washer: Package includes 1 magnetic washer door prop with 1 super strong magnet and 1 flexible hose, which helps washer air out, and keeps washer clean and fresh.
  • Easy to Use: 1. attach the magnetic base to the inside door frame of washer; 2. shape the hose to hold the washer door; 3. detach the door holder after use.
  • Strong Magnet: The magnet is super strong, once stick on the metal surface, the washer door holder will not move anymore. If you want to reposition the holder, just pull the hose near the magnet with some effort, and stick again.
  • Adjustable Hose: The hose is flexible, you can shape the hose to hold the washer door, meantime you can adjust the door opening to your liking.
  • No Scratches on Washer: The magnet and hose are covered with rubber, will not rust, can last for years. Also it will not scratch the surface of washing machine. NOTE: The item is suitable for metal front load washer, not work on stainless steel or plastic washer because they are not magnetic.

As an Amazon Associate, We earn a small commission from qualifying purchases at no added cost to you.

New products list:

Last update on 2022-06-03 / Affiliate links / Images from Amazon Product Advertising API


Last updated on June 14, 2022 8:49 am

As an Amazon Associate, We earn a small commission from qualifying purchases at no added cost to you.

What to consider before purchasing the Stabilus Lift O Mat 448847.

For a few countries like the United States of America, the customers prefer to purchase many varieties of products from Amazon.
Amazon supplies a variety of products with credible platform.
Buying form Amazon is like buying directly from the manufacturer.

Amazon.com works as a third-party and tied with manufacturers worldwide.
Amazon describes Stabilus Lift O Mat 448847 products with a clear explanation provided by its manufacturer. These information can help shoppers make the right decision easier.

The guide provides information about the specifications of the Stabilus Lift O Mat 448847 you want, such as its pros, features, size, function, and brand.
If shoppers want a Stabilus Lift O Mat 448847 with any specific features, purchasing from Amazon is the best location or platform.
A list of products will appear on your laptop or monitor or Android phone as soon as you type in the features you prefer.

Choosing The Right Stabilus Lift O Mat 448847

1. Select the right spec. Browse through the category at Amazon, and you will see a whole host of specifications.
As a useful shortcut, just look at the prices. It will often tell you which products are more reliable or durable or powerful than others. It helps to know a little bit about what you are dealing with.

2. Look at customer satisfaction. See which products has the best rating. The best rating (usually between 0-5 or 0-10 scale) can help you understand how the product performed according to customer’s review.

3. Check the brand or manufacturer score. Less known manufacturer or brand tends to provide lesser quality product. Overtime, customers will provide feed backs which product performed the best.

4. Customer reviews. It would be the most important factor to consider. Customers leave feedback regarding their experience with the best Stabilus Lift O Mat 448847 they purchased from Amazon.
Every single review posted, it will help you to know whether the best Stabilus Lift O Mat 448847 you want to buy good or bad.

We hope our recommendation can help.

———————————-

PrimeaReviews is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
As an Amazon Associate, We earn a small commission from qualifying purchases at no added cost to you.