10 Best Roof Jack

10 Best Roof Jack

Roof Jack. We found more to the list of product, including some flaws. In this article, we will give you information so that you will learn about the analysis of list of products so you can get a better view of each product.

Our editors research, and recommend the best products; you can learn more about our review process here. Primeareviews earns a commission through the affiliate links at no additional cost to you.


Bestseller No. 1
Guardian 2500 Adjustable Roofing Bracket
302 Consumer Reviews
Guardian 2500 Adjustable Roofing Bracket
  • Attaches To The Our Pump Jack System To Offer A Sturdy, Flat Surface To Stand On While Roofing Or Working At Heights
  • Durable All Steel Construction With An Adjustable 6" Or 10" Platform,
  • Designed To Be Used With 2" x 6" Or 10" Planks
  • Bracket Allows For Easy Installation & Removal Without Damaging Shingles
  • Compliant With OSHA Regulations
  • Durable adjustable roofing bracket
  • All-steel construction
  • Easy installation
  • Designed to be used with 2-by-6-inch or 10-inch planks
  • OSHA compliant
Bestseller No. 3
Miller Nordyne 903656 Roof Jack Cap Assembly
93 Consumer Reviews
Miller Nordyne 903656 Roof Jack Cap Assembly
  • Redesigned all-weather crown assembly helps minimize pilot light blow-outs
  • Factory Replacement item
  • Easy Installation Instruction included
  • Fits Miller, Intertherm, Nordyne & Broan Furnace with model #'s that start with MI, MBHA, MGBA, MGBB, MGHA, MGHB, MMBA, MMBB, MMHA, MMHB, MSBA, MSBB, MSHA & MSHB
Bestseller No. 4
Tie Down Engineering Roof Zone 65005 Ladder Hook with Wheel Roof Ridge Extension (Pack of 2)
373 Consumer Reviews
Tie Down Engineering Roof Zone 65005 Ladder Hook with Wheel Roof Ridge Extension (Pack of 2)
  • Rubber Grip T-bar to prevent damage to shingles and metal roofs
  • Yellow Zinc plated steel for longer life
  • 2 ladder hooks are recommended for each ladder (this Kit includes 2 hooks)
  • INCLUDES: 2 Ladder Hooks with Wheel
Bestseller No. 5
Guardian 2501Q Adjustable Heavy Duty Bracket, for Use with 12/12 Pitch Roofs, 45 Deg Fixed Angle
39 Consumer Reviews
Guardian 2501Q Adjustable Heavy Duty Bracket, for Use with 12/12 Pitch Roofs, 45 Deg Fixed Angle
  • Item Weight: 2.1 lb
  • Country of Origin: United States
  • Brand name: Qualcraft
  • Item Dimensions: 18.46"L x 9.78"W x 9.56"H
SaleBestseller No. 6
Oatey 14052 Retro Master 0.25'-5.75' Pipe Diameter Roof Flashing 8' x 8' Base, Black
207 Consumer Reviews
Oatey 14052 Retro Master 0.25"-5.75" Pipe Diameter Roof Flashing 8" x 8" Base, Black
  • Slides over pipe - for pitch to 45 degrees
  • Use silicone sealant between base and surface, and secure with sheet metal screws
  • Multi-size pipe sealing range
  • Molds to metal, plastic, etc
  • Non-fading EPDM collar
  • Universal roof flashing
  • Slides over pipe for pitch to 45 Degree
  • Multi-size pipe sealing range
  • Molds to metals, plastic and more
  • Non-fading EPDM collar
SaleBestseller No. 7
BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks
73 Consumer Reviews
BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks
  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks; Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack; These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion; Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins; ISO9001 certified for strength and durability
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements; The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends; Min height has an 11,200-pound (5,080 kg) capacity; Max height has a 2,500-pound (1,134 kg) capacity; Install base plate on a stable concrete slab under the area you wish to support; Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack; Always grease threads before use (grease not included)
  • VARIETY OF USES: Temporarily secure a weak floor, crawl space, heavy loading area, stairs, or roof trusses with these adjustable floor jacks; Use as basement support posts, ceiling jacks, crawl space support jacks, or screw jacks home leveling post floor jack; Ideal for home and industrial settings; Not designed for use as permanent supports
Bestseller No. 8
Flashers #3 Grey EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 1/4' to 5') - 100% Made in The USA
38 Consumer Reviews
Flashers #3 Grey EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 1/4" to 5") - 100% Made in The USA
  • MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce
  • EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
  • Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
  • Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
  • Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
Bestseller No. 9
Flashers #7 Silicone Grey High Temp Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 6' to 11') - 100% Made in The USA
93 Consumer Reviews
Flashers #7 Silicone Grey High Temp Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 6" to 11") - 100% Made in The USA
  • MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce
  • Silicone Flashers are rated to service a continuous temperature range of -100 to +450 degrees Fahrenheit.
  • Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
  • Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
  • Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
Bestseller No. 10
Residential Retrofit Pipe Flashing (Shingle Roof) Electrical Mast Flashing 1/4' - 5 3/8'
56 Consumer Reviews
Residential Retrofit Pipe Flashing (Shingle Roof) Electrical Mast Flashing 1/4" - 5 3/8"
  • Qty:1
  • Withstands temperatures up to 239° F.
  • Reinforcing ribs inside cone help to stand up under snow loads.

New releases on Amazon

New
2pc Bundle - Flashers #3 Black EPDM and Grey High-Temp Silicone (Pipe OD 1/4" to 5") Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing - 100% Made In The USA
  • Manufacturer Direct - 100% Made in the USA by an American Workforce
  • EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit. Silicone Flashers are rated to service a continuous temperature range of -100 to +450 degrees Fahrenheit.
  • Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
  • Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
  • Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
New
Flashers #8 Brown EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 7" to 13")
  • 100% Made in the USA by an American Workforce
  • Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
  • Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
  • Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
  • EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
New
Flashers #8 Red EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 7' to 13')
2 Consumer Reviews
Flashers #8 Red EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 7" to 13")
  • 100% Made in the USA by an American Workforce
  • Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
  • Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
  • Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
  • EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
New
Flashers #3 Copper EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 1/4" to 5")
  • 100% Made in the USA by an American Workforce
  • Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
  • Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
  • Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
  • EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
New
Flashers #2 White EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 1-3/4' to 3-1/4')
1 Consumer Reviews
Flashers #2 White EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 1-3/4" to 3-1/4")
  • 100% Made in the USA by an American Workforce
  • Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
  • Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
  • Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
  • EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
10 Best Roof Jack
Scroll to top