16 Best Post Driver For Driving Fence Posts 2021 Reviews

Post driver. Are you having trouble driving a fence post? Well, if you use a post driver, you won’t have it anymore. There are pneumatic or manual drivers the gas-powered. These tools provide quick and easy installation.

With the help of vibrations, you will get accuracy and precision in your work. They are lightweight that makes them portable and easily maneuverable.

What is a post driver?

A post driver is a tool utilized to drive fence posts pushing down into the ground. It is not easy to plant fence posts. The task is not just having a hole in the ground. The fence can fall over because it was installed too shallowly into the ground.

The posts must be deeply rooted in the ground. Once it is rooted deep, they stand tall firmly. A post driver provides a similar downward motion against a post. The motion will make sure to push the post deep into the ground without damage to the post or at least minimal damage.

Benefits of a post driver

  • A gas-powered post driver is equipped with a very high-performance 4-stroke or 2-stroke engine that deliver performance
  • There is a throttle trigger to increase and decrease the power of the engine. It applies pressure for an easier task
  • The power tool is very reliable and highly durable
  • It usually comes with an easy and smooth recoil starting system
  • Mostly has rubber handles that have a soft grip to provide a spring vibration dampening system
  • A throttle adjuster will make sure the post driver is more responsive equipment for simple adjustments
  • The faster job of posting fence post
  • An efficient posting fence post
  • A post driver is suitable for stakes, pipes, and round posts with a small diameter
  • The tool knocks the stakes, pipes, and posts and drives them firmly down to the ground

Types of the post driver

1. Gas-powered post driver

The most common choice of most people who are looking for a tool for posting fence posts that do not require the power of the hand. Gas-powered post drivers are very easy to use and very powerful. One gas-powered post driver can install posts or fence posts with lengths of up to 10 feet in just a few seconds. It is a task that saves energy and time.

Workload

One gas-powered post driver can reduce the workload by 50% and lower physical fatigue! The size is small and it is portable that makes them some of the most versatile fence installation tools in the market.

This tool can be used on a wide variety of different fences. Many products come with handle extension kits, for installing much taller posts without getting on top of things. It will make jobs quicker, without the need for ladders when operating heavy equipment.

2. Manual post driver

The benefit of a manual post driver is how simple it is. It is without moving parts, no need for maintenance, no need for fuel. You lift the tool up, you drive it down onto a post, and the post going into the ground.

A manual post driver is suitable for tossing into the back of a wagon for hauling. The tool will not suffer being outdoor.

Lightweight

These tools are lightweight and they are less expensive too. The problem is, manual post drivers can cause fatigue due to extended periods of time of use. This is because you have to lift and thrust down the driver more than five times over and over again per post, depending on the condition of the ground and the size of the post.

If you are driving one or two posts, it is fine. But for dozens for a fencing project, you will wear yourself out. Not to mention if you are installing large-diameter posts in the hard ground with a driver weighing more than 30 pounds.

3. Hydraulic post driver

Hydraulic post drivers were adapted to jackhammers. This tool can run off of the freestanding gas-powered units, auxiliary hydraulics of tractors, or skid-steers. You will find them attached to the loaders of equipment such as skid loaders and farm tractors compatible with the post driver.

The post driver generates a great amount of power to drive t-posts through rock and asphalt. They are saving manpower and time spent digging well-spaced post holes. This method will be a successful way of installing a fence post in hard compacted and rocky soil.


Factors to consider when purchasing a post driver

1. Manual post driver

  • Fitting capability: the manual post driver must fit above your post. If the manual post driver is smaller than the pole or bigger, it can not help you in any way.
  • Portability: you might have to carry the manual post driver from one place to another place. Since it is heavy, you would struggle to carry them. The best way to carry is when there is a puller with the post driver.
  • Sturdy: The manual post driver needs to be sturdy and durable to post a pole by its weight. If it is not sturdy enough, it might break.
  • Weight: Since you have to lift the post driver up to drive the post, the weight must be a consideration. Because if you cannot carry the tool, there is no need to buy it.

2. Gas-powered post driver

  • Drive depth. These gas-powered post driver machines are available with different depths of penetration different types of post driving. Some models can drive posts at depths between 2-inches to 3-feet. For other ranges, find a machine with different depth adjustment options. One powerful post driver model can drive in posts in the 2-inch to 10-foot depth range.
  • The number of posts. Find a model with a higher weight and higher horsepower engines to finish a regular post-driving job. These machines can handle the toughness of the process. What you require to do is to discover the amount of time it takes to install a single post with the ost driver. A powerful gas-powered post driver can drive a pole in about 30 to 60 seconds. Other models can take about 2 to 3 minutes to install a pole.
  • The maintenance. All gas-powered post driver units have to be maintained, operated, and fixed after some period of use. The machine is service-friendly, and you need to lubricate the engine routinely. Find a machine that needs minimal maintenance.
  • Type of soil. Before considering purchasing a post driver, you need to determine the soil type. A minimal power machine can install a medium-sized fence in medium-heavy, and wet soil. For harder soil, choose a high-capacity post driver model. For the hardest surfaces, it requires drilling a 1-inch hole in the ground before installing the poles. Some models are equipped with adjustable speed settings.
  • Post size capacity. Different gas-powered post drivers have different weights and capacities. The size of the post driver will depend on the size of the chuck adapters. For versatile pole-size installations, a chuck that fits different pole sizes will finish the job. Lightweight models are suitable for a single post size. Choose the higher quality drivers with multiple chuck adapters for multiple Chuck adapters. Install higher posts with a handle extension kit. A versatile gas-powered post driver can drive 1-5/8 on a 4-inch x 6-inch post.

Best gas-powered post driver

1. Titan PGD3200 Contractors Series 4-Stroke Gas-Powered Post Driver

Titan gas-powered post driver
Buy At Walmart
Buy at Home Depot
But at Northerntool

You can cut time and effort to drive a post by Titian PFG3200 Gas-Powered Post Driver. It is crafted for medium to heavy-duty use by workers, homeowners, and commercial users. You can minimize the hard work using this driver.

Engine

The pole pounder comes with a powerful, 1.3-horsepower, 4-stroke, gas-powered Honda engine to drive stakes at 1,850 beats per minute. The machine also features a repair kit, a rolling carry case, and a 3.25-inch barrel, and an adapter sleeve for 1-inch and 2-inch diameter posts.

Soft grip

You can drive poles and stakes from 1 to 3-1/8 inches in diameter. The grip handle with dampening springs is comfortable for minimal operator fatigue.

Lightweight and Reduce Vibration

The dampening springs will reduce vibration during the drive to reduce back strain and fatigue. Its weight is 45 pounds for easy to lift, move, and carry down the fence line.

Product Type
Engine 1.3 -horsepower, 4-stroke, Honda engine
BPM Can drive stakes at 1,850 beats per minute
Measurement 1 to 3-1/8 inches in diameter with a 3.25-inch barrel
Grip Comfortable grip handles
What’s Included 2-inch adapter sleeve for 1-inch and 2-inch posts
Driver, adapter, rolling carry case, and repair kit
Dampening springs
Starting Up Simple recoil pull start with trigger throttle
Integrated stop button
Weight 45 pounds
Warranty 1-year warranty

2. Titan PGD2875H 4 Stroke Gas-Powered Post Driver

Titan gas-powered post driver
Buy at Walmart
Buy at Home Depot

This Titian Gas-Powered Post Driver with a Honda engine is designed for light-duty use. It can drive less than 1,000 fence posts. A suitable gas-powered post driver for consumer users, homeowners, and workers.

Engine

The gas-powered pole pounder comes with a 1.3-horsepower, 4-stroke, gas-powered Honda engine to drive poles or stakes at 1,500 to 2,000 beats per minute. It comes with a 3.25-inch barrel, 1-inch, and 2-inch barrel adapters, a rolling carry case, and a repair kit. A user can drive poles and stakes from 0.75-inches to 3-inches in diameter.

The Grip

The gas-powered pole pounder sports comfortable grip handles with dampening springs that reduce vibration. You can carry and move this machine easily due to its weight of 28-pounds.

Product Type
Engine 1.3 -horsepower, 4-stroke, gas-powered Honda engine
BPM 1,500 to 2,000 beats per minute
Measurement 1 to 3-1/8 inches in diameter with a 3.25-inch barrel
Grip Comfortable grip handles
What’s Included 0.75-inch to 3-inch in diameter with a 3.25-inch barrel and included 1-inch and 2-inch barrel adapters
Driver, adapters, rolling carry case, and repair kit
Dampening springs
Starting Up Simple recoil pull start with trigger throttle
Integrated stop button
Weight 28 pounds
Warranty 1-year warranty

3. XtremepowerUS Gas-Powered Post Driver 2-stroke 81010-XPH

Buy at Home Depot

The XtremepowerUS 81010-XPH can save you the effort, energy, and time with efficiency and smoother operation of the post driver. Its versatile design lessens the working strength load of the operator. Any user can achieve 360° multi-directional operation.

Driver

It can drive post and ground rods twice faster than a manual post driver. The 3-1/4 inches driver barrel can fit all posts up to 3-inches in diameter.

Many Uses

This gas-powered post driver is ideal for use in the garden, agricultural landscaping, geophysical exploration, and construction.

Product Type
Engine 52-cc, 2-stroke engine
BPM 1,350 impacts per minute at 41.5 feet/pounds of impact force
Measurement 1 to 3-1/4-inches driver barrel
Grip Comfortable grip handles
What’s Included 0.75-inch to 3-inch in diameter with a 3.25-inch barrel and included 1-inch and 2-inch barrel adapters
Driver, adapters, rolling carry case, and repair kit
Anti-vibration dampening system
Starting Up One simple recoil pull-start method
Weight 40.78 pounds
Warranty 90-days warranty

4. Rhino GPD45 4-Stroke Gas Powered Post Driver

Rhino gas-powered post driver
But at Amazon

This Rhino GDP45 is equipped with Honda GX35 4-stroke industrial engine and has passed the Honda US Certification process. The machine is one of the more massive models due to its weight of 44-pounds. This gas-powered post driver can provide a lot of power.

More Driving Force

With 35% more driving force, there is no reason it can not handle heavy-duty projects. One unit comes with Chuck-Lok adapters (1-inch, 1-3/4-inch, and 2-inch) to drive in round posts that measure 2-3/8-inch.

Durable and Comfortable

It is comfortable to use with ergonomically designed handle with an integrated throttle. Steel skid plate provides rugged durability and protects the engine.

Product Type
Engine Honda GX35 4-Stroke Engine
Measurement 1.2-4-pounds channel post, tent stake, or 1-3/4-inches to 2-1/2-inches square signpost and square post sign anchor with a drive cap
Grip Padded Grip
What’s Included CIS Vibration Dampening
Starting Up One simple recoil pull-start method
Weight 43.7 pounds
Warranty Limited Impact warranty

5. Field Tuff FTF-33GPD Gas-powered Post Driver

Filed Tuff gas-powered post driver

This Field Tuffs FTF-33GPDM Gas-powered Post Driver comes with a 33cc engine drive up to 2.67-inch in diameter. It has a max power of 1.2 HP giving the user a lot of power for driving posts.

Dampening Springs

Its two-way dampening spring will reduce vibration to lessen fatigue. The machine can perform a 1,700-2,230 blows per minute faster job with a 2-cycle, recoil start engine with a speed of 7,500 rpm.

Long-lasting Operation

Its engine has a fuel tank capacity of 34.16 oz. for long-lasting operation. This tool includes a storage stand and 2.25-inches and 2.75-inches post guides. You can use this post driver for barriers, orchard fences, and farm fences. One unit comes with a blow mold case, and 1-year limited parts warranty.

Product Type
Engine 33 cc engine, 1.2 HP max power
BPM 1,700-2,230 blows per minute
Measurement 2.25-inches and 2.75-inches post guides
Grip Padded Grip
What’s Included Two-way damping spring to reduce vibration
Starting Up Recoil start engine
Weight 42 pounds
Warranty 1-year limited Manufacturer’s parts

6. REDIclassic Gas-powered Post Driver

Rediclassic gas-powered post driver
Buy at Amazon

The REDIclassic is a gas-powered post driver that comes with a 2-inch drive tube. The feature makes it possible to get an excellent performance finishing T posts and fence posts installation that measures lower than the 2-inch diameter. This is a versatile post driver because it can ground rods and rebar.

Lightweight

The weight is only 32 pounds that will not limit the work and will not cause any trouble working for long hours. You can move the machine anywhere to achieve a high degree of maneuverability.

Engine

The gas-powered post driver comes with a 1.3 horsepower, 4-stroke engine to generate 1720 beats per minute. With such lightness and power, you can finish the light work of most projects.

Product Type
Engine HONDA 1.3 HP 4-stroke engine
BPM 1,720 blows per minute
Measurement Guide tube is 2.0-inches
What’s Included 2-inches OD, stakes, anchors, grounding rods, and rebar
Starting Up Recoil start engine
Weight 32 pounds
Warranty Lifetime hammer warranty; 3-year warranty

7. REDI-DRIVER BOSS Gas-Powered Post Driver

Redi-driverboss gas-powered post driver
Buy at Amazon

This Redi-driver Boss gas-powered post driver has a 3-1/8-inch guide tube, that weighs 35-pounds. The post driver features reducer sleeves, available in 13/16-inch, 1-3/4-inch, 2-1/4-inch, and 2-1/2-inch. There are optional handle extensions to speed up the project and very useful when driving taller posts.

Long Lifespan

It comes with a storage case to protect from damage and maintains a long lifespan. For complete performance, the machine has an integrated throttle and a polymer piston. You can easily start the machine using the trigger throttle.

Product Type
Engine 1.3 hp HONDA GX35, 4 stroke engine with 7,000 RPM
BPM 1,820 blows per minute
What’s Included High-quality sealed bearings
Quality Viton 0-rings throughout
Starting Up Recoil pull start with trigger throttle
Integrated stop button
Weight 35 pounds
Warranty 3-year warranty

8. Skidril Gas-powered Post Driver G2XD-2

Buy at Amazon

You can use the Skidril Gas-powered Post Driver G2XD-2 with 4-inch posts due to the power from a Honda 4-stroke engine. You can choose between a 4-stroke or a 2-stroke engine to get a lot of energy.

BPM

The engine can deliver 1,100 to 1,800 beats per minute. With such power, it lowers the work-time of the driving posts.

Smooth Performance

The machine weighs 42-pounds without causing maneuverability issues and provides smooth performance as well as a lot of driving force. With just a touch of an on-off function, you easily use the machine uninterrupted. It comes with the multi-collet option air cushion dampening for recoil on tough jobs.

Product Type
Engine 4-stroke OHV engine or powerful 2-stroke
BPM 1,100 to 1,800 beats per minute
What’s Included Air cushion dampening
Weight 42 pounds
Warranty 3-year warranty

9. Titan PGD2000 Gas-powered Post Driver Commercial Series

Buy at Northerntool
Buy at Amazon
Buy at Walmart
Buy at Home Depot

The Titan PGD2000 gas-powered post driver is a portable and powerful commercial post driver with Honda GX35, 1.3 horsepower engine. It weighs only 35-pounds for an easy-to-carry, easy-to-move, and easy-to-lift fence line. The operator can finish the work twice faster compared to a manual driver.

Drive Post

This machine features 2-inches heavy-duty steel barrel for driving t-posts, Pasture Pro posts, fiberglass rods that are 1-inch to 1-inch in diameter. Each unit comes with one adapter sleeve for driving posts, rods, or rebar up to ⅞-inches, and a tool kit for servicing. This post driver is 100% self-contained.

Engine

Its Honda engine can deliver 1,750 beats-per-minute. The internal elements are high-quality sealed bearings and Viton O-rings.

Grips

To reduce fatigue, there are internal dampening springs to limit vibration and comfortable grips. There is no need for compressors or hoses or compressors. Additional ½-inches and ¾-inches reducer sleeves are available.

Product Type
Engine 1.3 HP Honda GX 4-stroke engine
BPM 1,750 beats-per-minute
What’s Included High-quality sealed bearings
Internal dampening springs
Viton O-rings
Simple recoil pull start with trigger throttle
Integrated stop button
2-inches heavy-duty steel barrel accepts 1-inch to 1-⅞-inches in diameter
Weight 35 pounds
Warranty 1-year warranty

10. Rhino GPD30 Ranch Pro Gas-Powered Post Driver

Buy at Amazon

The Ranch GPD30 Ranch Pro Post Driver is suitable for a temporary fence, erosion control, an electrical ground rod, agriculture, and landscape. The machine has a 1¾-inches chuck to provide a high degree of versatility because an operator can use it for 1.25-pounds and 1.33-pounds T posts.

Post

It is also possible to use for posts that are 1-5/8-inches in diameter to the 1-inch reducer that acts as a useful component for using rebar and on-ground rods.

Lightweight

You can carry it around weighs only 35-pounds.

Engine

The Honda GX35 4-stroke industrial engine offers great power and delivers 1,720 beats per minute. The dampening handles can lower vibration for a comfortable drive without fatigue.

Product Type
Engine Honda 4-Stroke Engine
BPM 1,720 beats-per-minute
What’s Included 1-¾-inches I.D. chuck
Rhino’s CIS™ Vibration Dampening
1-inch adapter
Padded grip for handling comfort
Weight 35 pounds
Warranty 2-year residential and 1-year commercial warranties

11. BSTOOL Pile Driver Post 2-Stroke

BSTOOL Gas-powered Post Driver
Buy at Amazon

This BSTOOL gas-powered post driver is made of metal, weighs 28.7-pounds, for an easy-to-use 100% self-contained gas-powered post driver. It comes with a 2-stroke, 2.3 horsepower gasoline engine.

Post

The machine has two post-driving heads, a 55-mm, and a 70-mm head, suitable for driving Y-posts, T-posts, and ground rods. There will be no fatigue and stable operation while driving posts due to its vibration-absorbing springs.

Ergonomic

BSTOOL machine features a heavy-duty driver casting and adjustable interlocking controls. Its design is ergonomic with plastic and rubber handle while the sponge in the handles lessens its recoil force. It operates on mixed oil for enhanced efficiency, providing a variable speed of 1,300 to  30,000 BPM.

Product Type
Engine 2-stroke, air cooling, single-cylinder engine
52cc, mixed oil (25 gasoline: 1 motor oil)
BPM 1,300-3,000 BPM
What’s Included Post driving head mount size: 55-mm and 70-mm
Max. power & speed: 1900W(2.3HP)/6500r/min
Fuel consumption rate: ≤0.6L/h
Max. torque & speed: 2.5N.m/5500r/min
Weight
Warranty

12. Skidril 2-stroke Gas-Powered Post Driver

Buy at Amazon

This Skidril 2-stroke Gas Powered can produce 2-horsepower. Weighs less than 40-pounds with an ergonomic design, powered by the cyclone gasoline engine. The operator does not need any hoses to make it easy to maintain.

Diameter

The machine can drive posts as large as 4-inches in diameter, with a multi-chuck system and an air cushioning feature. They reduce the recoil effect and providing longevity.

Product Type
Engine 2-stroke or clean burn quiet 4-stroke Honda EPA engine choices
BPM 1,800 BPM
What’s Included Drives a T-Post in 20 second
Internal vibration dampening
Drives up to 3-1/2-inches pipe
One quart of fuel in an hour
Weight 40-pounds
Warranty Limited lifetime warranty

13. Yescom Gas-Powered T-Post Driver

Yescom gas-powered post driver
Buy at Walmart

This Yescom gas-powered has a powerful 1.7 horsepower or 1,300 watts, 51.7cc pile driver, or post driver to work more efficiently and enhance productivity. It can deliver 3.5 N.m Max torque for larger impact power. The machine is has a throttle on the handle for impact power adjustment.

Vibration Damper

To reduce fatigue, this machine has an internal vibration damper for comfortable use. To ensure smooth operation and prolonged use, it comes with superior cooling vents.

Rust Resistance

The driver pile head is made of aluminum to ensure rust resistance. The operator can use the machine for construction, fencing, posts, garden, and agriculture. It is EPA certificated.

Product Type
Engine 51.7 cc, 2-stroke, 1.7 horsepower, air-cooling engine
BPM 1,500 BPM
What’s Included Impact Energy: 30-65 Joule
Max Power and Speed: 1.7 hp or 1,300 watts and 7,000 r/min
Pile Head Inner Diameter: 55-mm and 70-mm
Hand pull start
Max Torque and Speed: 3.5 N.m and 5,000 r/min
Weight 43-pounds
Warranty

14. XtremepowerUS Gas-Powered Fence T-Post Driver Engine Gasoline

XtremepowerUS gas-powered post driver
Buy at Walmart

This XtremepowerUS 52cc Gasoline T-Post Pile Driver is a suitable tool to drive ground rods and t-posts in construction, garden, agricultural landscaping, and geophysical exploration. With the machine, you will save time, energy, and back-breaking motions.

Versatile

The versatile design reduces the working strength load, which allows the operator to achieve 360-degree multi-directional operation. The 3-1/4-inches driver barrel can fit all posts up to 3-inches in diameter.

Engine Power

Its engine can deliver up to 1,350 impacts per minute at 45 feet-pounds of impact force. Ergonomic T-grip handles with an anti-vibration dampening system lower fatigue. It will start easily with a simple recoil pull-start. You can store and move the tool with its blow-molded carrying case and wheels.

Product Type
Engine 25cc, 2-stroke or 4-Stroke single-cylinder, air-cooled, gasoline engine
BPM 700-1,350 BPM
What’s Included Recoil start method
Fuel Tank Volume: 1.3L
Oil Capacity: 0.079L
Max Power: 1,500W or 9,000 r/min
Max Torque: 2.5N.m or 5,500 r/min
Fuel Consumption Rate: <0.60L/hr
Weight 67-pounds
Warranty 30 day return window for any reason plus an additional 30 days

15. Thor PD1002 Tent Stake Gas-powered Post Driver

Thor Gas-powered post driver PD1002
Buy at Walmart

The Thor PD1002 Tent Stake comes with a Huasheng 2-stroke engine for professional use. It weighs 42-pounds and you can easily move it from project to project. You can use the machine for driving in tent stakes, t-posts, and any pipes with a 2.5-inches diameter.

Easy to Start

The operator can start the gas-powered post driver easily due to its recoil starter. You can work without cords or hoses for easy maneuverability.

Engine

Its engine can deliver an impact rate of 1,100-1,800 blows per minute (BPM). The PD1002 comes with a sturdy wheeled carrying case and you can service or replace it with easy low-cost repairs. It is one of the lowest cost of ownership gas-powered post driver models on the market today.

Product Type
Engine Huasheng 2-cycle Engine, gas-powered
OHV Engine, 1.8 horsepower, 6000 RPM, 50cc
BPM 1,100-1,800 BPM impact rate
What’s Included Recoil starter
Diaphragm impact energy: 45-feet-pound
Weight 42-pounds
Warranty 12-month engine warranty

16. Thor PDFP5 Fence Post Driver, Gas-powered

Thor gas-powered post driver
Buy at Walmart

The Thor PDFP5 comes with a Honda GX-35, 4-stroke engine that weighs 42-pounds.

Lightweight

This lightweight gas-powered post driver measures 29″ x 11.5″ x 13″. You can move the machine easily to finish driving tent stakes, t-posts, and any pipes with 2.5-inches to up to 4-inches in diameter.

Impact Rate

Its impact rate is 1,100-1,800 BPM to finish any job with ease.

Product Type
Engine Honda GX-35, 4-Cycle Engine, Gas-Powered
1.4 horsepower, 6,000 RPM, 33.5cc
BPM 1,100-1,800 BPM impact rate
What’s Included Centrifugal clutch
One 1.0 Quart tank size
Diaphragm impact energy: 45-feet-pound
Weight 42-pounds
Warranty 12-month engine warranty

Gas-powered post driver comparison chart

Product Engine Weight Impact Rate
Titan PGD3200 Contractors Series 4-Stroke Gas-Powered 1.3 horsepower, 4-stroke, Honda engine 45 pounds 1,850 beats per minute
Titan PGD2875H 4 Stroke Gas-Powered 1.3 horsepower, 4-stroke, gas-powered Honda engine 28 pounds 1,500 to 2,000 beats per minute
XtremepowerUS Gas-Powered 2-stroke 81010-XPH 52-cc, 2-stroke engine 1,350 impacts per minute
Rhino GPD45 4-Stroke Gas Powered Honda GX35 4-Stroke Engine 44-pounds 1,720 BPM
Field Tuff FTF-33GPD Gas-powered 33 cc engine, 1.2 horsepower 42 pounds 1,700-2,230 blows per minute
REDIclassic Gas-powered HONDA 1.3 HP 4-stroke engine 32 pounds 1,720 blows per minute
REDI-DRIVER BOSS Gas-Powered 1.3 horsepower HONDA GX35, 4 stroke engine with 7,000 RPM 35-pounds 1,820 blows per minute
Skidril Gas-powered G2XD-2 4-stroke OHV engine or powerful 2-stroke 42-pounds 1,100 to 1,800 beats per minute
Titan PGD2000 Gas-powered Commercial Series 1.3 HP Honda GX 4-stroke engine 35-pounds 1,750 beats-per-minute
Rhino GPD30 Ranch Pro Gas-Powered Honda 4-Stroke Engine 35-pounds 1,720 beats-per-minute
BSTOOL Pile Driver Post 2-Stroke 2-stroke, air cooling, single-cylinder engine 28.7-pounds 1,300-3,000 BPM
Skidril 2-stroke Gas-Powered 2-stroke or clean burn quiet 4-stroke Honda EPA engine choices 40-pounds 1,800 blows per minute
Yescom Gas-Powered T-Post Driver 51.7 cc, 2-stroke, 1.7 horsepower, air-cooling engine 43-pounds 1,500 blows per minute
XtremepowerUS Gas-Powered Fence T-Post Driver Engine Gasoline 25cc, 2-stroke, or 4-Stroke single-cylinder, air-cooled, gasoline engine 1,350 blows per minute
Thor PD1002 Tent Stake Gas-powered Huasheng 2-cycle Engine, gas-powered 42-pounds 1,100-1,800 blows per minute
Thor PDFP5 Fence Post Driver, Gas-powered Honda GX-35, 4-Cycle Engine, Gas-Powered 42-pounds 1,100-1,800 blows per minute

Best manual post driver

1. Brady 87982 U-Channel Sign Manual Post Driver

Brady manual post driver
Buy at Amazon
  • Dimension: 30 x 8.3 x 4 inches
  • Material: alloy steel
  • Weight 25 Pounds

2. Speeco S6110200 Spring Manual Post Driver

Manual Post Driver
Buy at Walmart
  • Dimension: 2.38 x 2.38 x 31 in.
  • Weight: 18-pounds
  • Designed to reduce the effort
  • Spring inside
  • Easy to grip handles
  • Can work with posts up to 2-inches in diameter

3. ZORO SELECT 4LVN8 Fence Manual Post Driver

Manual Post Driver
Buy at Walmart
  • Loop handle
  • Weight 17.5 pounds
  • Width : 9-inches
  • Gauge: 9
  • Type: Manual post driver
  • Height: 24-inches
  • Fence Post Driver
  • Material: 2-3/4-inches ID Steel Tube

4. G & B 901147A Fence Post Driver Manual

Manual Post Driver
Buy at Walmart
  • Fence manual
  • Easy handles
  • Low risk of damage to tops of fence posts
  • Handles are tapered for comfort
  • 17-pounds of power

Product Weight Feature
Brady 87982 U-Channel Sign 25 Pounds Alloy steel
Speeco S6110200 Spring 18-pounds Spring and easy to handle
ZORO SELECT 4LVN8 17.5 pounds 2-3/4-inches ID Steel Tube and loop handle
G & B 901147A Fence 17-pounds Low risk of damage to tops of fence posts

16 Best Post Driver For Driving Fence Posts 2021 Reviews
Scroll to top