10 Best Monoblock Amplifier

10 Best Monoblock Amplifier

Monoblock Amplifier. We found more to the list of product, including some flaws. In this article, we will give you information so that you will learn about the analysis of list of products so you can get a better view of each product.

Our editors research, and recommend the best products; you can learn more about our review process here. Primeareviews earns a commission through the affiliate links at no additional cost to you.


Bestseller No. 1
Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W
  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
  • Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
Bestseller No. 2
Planet Audio PL3000.1D Class D Car Amplifier - 3000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers
  • Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Strapping Capable - You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
  • Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
  • Specs - Dimensions: 11.9” x 7” x 2.3”, Weight 6.7 lbs.
SaleBestseller No. 3
BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier - 1100 High Output, Monoblock, Class A/B, 2/4 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, Mosfet Power Supply, Stereo
  • Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
  • Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
  • Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
  • Specs - Dimensions: 9.13” x 10.44” x 2.25”, Weight: 4.43 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 30 Amp ATO Blade
  • Warranty - BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality
Bestseller No. 5
Sundown Audio SFB-3000D 3000W RMS Class D Amplifier
  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB).
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA.
Bestseller No. 6
CT Sounds CT-2000.1D Compact Class D Car Audio Monoblock Amplifier, 2000 Watts RMS
  • Car audio amplifier with 2000 watts RMS power at 1-ohm load (14.4v); 1200 watts RMS at 2-ohm load (14.4v); 650 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
  • Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 2000 watt amplifier absolutely pounds
  • Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
  • MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
  • 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection; sleep easy at night knowing your class d amplifier car audio is protected
Bestseller No. 7
Rockville dBcomp5 Mono Competition Amplifier 3500w RMS! Car Audio Amp
  • Features: Rockville dBcomp5 Mono Competition Amplifier 3500w RMS Dyno-Certified! Car Audio Amp.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 1 Ohm: 3500 Watts x 1 Channel
  • High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Fully Adjustable 24dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch. Limiter ON/OFF Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control.
  • Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Power/Protect/Clip LED Indicators on control panel. Power/Protect/Clip LED Indicators on Remote control. Minimum THD at Rated Power: 90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V.
  • Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. Dimensions: (W x H x L) 9" x 2.4" x 23.7"
Bestseller No. 8
Skar Audio Skar Audio SKv2-2500.1D Monoblock Class D MOSFET Competition Grade Subwoofer Amplifier, 2900W Max Power
  • Competition Grade SPL Class D Monoblock MOSFET Car Power Amplifier
  • Peak Power at 1 Ohm: 2,900 Watts | RMS Power at 1 Ohm: 2,500 Watts
  • Stable at 1 Ohm, Frequency Response: 15Hz - 270Hz
  • Featuring 4-Way Protection Circuitry and 1/0 Gauge Power & Ground Input Terminals for Maximum Current Flow
  • User Adjustable Low Pass Filter (Variable): 35Hz - 250Hz, Remote Subwoofer Level Control Included
  • Heavy Duty Advanced Heatsink Design Allows for Maximum Cooling & Efficiency | On-board Bass Boost Control (0-9dB)
Bestseller No. 9
Bestseller No. 10
Orion Cobalt Monoblock Amplifier – Class D Amplifier 1500W RMS 3000W Max, Car Electronics Car Audio Stereo Subwoofer 1 Ohm Stable Bass Boost MOSFET Full Range Amplifier for Car Speakers Sub Amp
  • QUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others.
  • 1 Ohm Stable - This cobalt subwoofer amplifier for car speakers is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively.
  • Low/High Level Inputs – The monoblock subwoofer amplifier for car stereo speakers with mosfet power supply comes with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
  • Features – The monoblock bass boost amplifier has features like - Frequency Response: 10~250HZ, Low Pass Filter, Bass Boost, Subsonic Control, Remote Bass Knob, MOSFET Power Supply, Thermal Protection, Phase Shift
  • Power – This Class D 3000 watt Amplifier has a power rating distribution as followed 3000 X 1 MAX @ 1 OHM. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.

Last update on 2021-12-08 / Affiliate links / Images from Amazon Product Advertising API


New releases on Amazon

New
New
Memphis Audio VIV3000.1V2 SixFive Series Monoblock Subwoofer Amplifier - 3000 Watts RMS
  • M-Equalization bass boost allows for both frequency and Q factor adjustment for precise tuning of your subwoofer system.
  • When you need an amplifier to push a couple massive 15" MOJO subwoofers, the VIV3000.1 is the perfect choice.
  • SixFive Series amplifiers are built on a relatively compact chassis given their impressive powerhandling making locating a suitable mounting location simple.
  • Output 2-Ohm @ 14.4V: 1600W x 1, Output 1-Ohm @ 14.4V: 3000W x 1
New
Alphasonik NA2400.1AB Neuron Series 2400 Watts Max Monoblock Car Amp with 4-Way Protection Circuitry Multi-Channel Bridgeable Class A/B Amplifier Low & High Level Inputs (Remote Bass Knob Included)
  • This listing contains: (1) NA2400.1AB 2400 Watt Max Monoblock Class A/B Amplifier (1) Remote Bass Knob with Connector cable (1) Operations Manual (1) Mounting Hardware Set
  • 1 x 1200W @ 4 Ohms 1 x 2400W @ 2 Ohms
  • Features: Nickel Plated Terminals Extruded Aluminum Heat Sink Low Level Input High Level Input Low Level Output Remote Bass Knob Included Mil Spec Double-Sided Glass Epoxy Circuit Board 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 50Hz - 250Hz Variable Input Sensitivity: 200mV - 6V 45Hz Bass Boost: 0 - 12dB ATC Fuse: 40 Amp x 2
  • Product Dimensions: 7.01" x 2.09" x 11.81" (178 x 53 x 300mm)
New
Alphasonik NA1600.1AB Neuron Series 1600 Watts Max Monoblock Car Amp with 4-Way Protection Circuitry Multi-Channel Bridgeable Class A/B Amplifier Low & High Level Inputs (Remote Bass Knob Included)
  • This listing contains: (1) NA1600.1AB 1600 Watt Max Monoblock Class A/B Amplifier (1) Remote Bass Knob with Connector cable (1) Operations Manual (1) Mounting Hardware Set
  • 1 x 800W @ 4 Ohms 1 x 1600W @ 2 Ohms
  • Features: Nickel Plated Terminals Extruded Aluminum Heat Sink Low Level Input High Level Input Low Level Output Remote Bass Knob Included Mil Spec Double-Sided Glass Epoxy Circuit Board 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 50Hz - 250Hz Variable Input Sensitivity: 200mV - 6V 45Hz Bass Boost: 0 - 12dB ATC Fuse: 30 Amp x 2
  • Product Dimensions: 7.01" x 2.09" x 9.45" (178 x 53 x 240mm)
New
Alphasonik NA6000D Neuron Series 6000 Watts Max Monoblock Car Amp with 4-Way Protection Circuitry Class-D Amplifier Low & High Level Inputs (Remote Bass Knob Included)
  • This listing contains: (1) NA6000D 6000 Watt Max Class-D Amplifier (1) Remote Bass Knob with Connector cable (1) Operations Manual (1) Mounting Hardware Set
  • 1 x 1500W @ 4 Ohms 1 x 3000W @ 2 Ohms 1 x 6000W @ 1 Ohm
  • Features: Nickel Plated Terminals Extruded Aluminum Heat Sink Low Level Input High Level Input Low Level Output Remote Bass Knob Included Mil Spec Double-Sided Glass Epoxy Circuit Board 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 50Hz - 250Hz Variable Input Sensitivity: 200mV - 6V 45Hz Bass Boost: 0 - 12dB ATC Fuse: 40 Amp x 4
  • Product Dimensions: 7.01" x 2.09" x 10.24" (178 x 53 x 260mm)
New
Alphasonik NA4000D Neuron Series 4000 Watts Max Monoblock Car Amp with 4-Way Protection Circuitry Class-D Amplifier Low & High Level Inputs (Remote Bass Knob Included)
  • This listing contains: (1) NA4000D 4000 Watt Max Class-D Amplifier (1) Remote Bass Knob with Connector cable (1) Operations Manual (1) Mounting Hardware Set
  • 1 x 1000W @ 4 Ohms 1 x 2000W @ 2 Ohms 1 x 4000W @ 1 Ohm
  • Features: Nickel Plated Terminals Extruded Aluminum Heat Sink Low Level Input High Level Input Low Level Output Remote Bass Knob Included Mil Spec Double-Sided Glass Epoxy Circuit Board 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 50Hz - 250Hz Variable Input Sensitivity: 200mV - 6V 45Hz Bass Boost: 0 - 12dB ATC Fuse: 40 Amp x 3
  • Product Dimensions: 7.01" x 2.09" x 8.66" (178 x 53 x 220mm)
New
Alphasonik NA2000D Neuron Series 2000 Watts Max Monoblock Car Amp with 4-Way Protection Circuitry Class-D Amplifier Low & High Level Inputs (Remote Bass Knob Included)
  • This listing contains: (1) NA2000D 2000 Watt Max Class-D Amplifier (1) Remote Bass Knob with Connector cable (1) Operations Manual (1) Mounting Hardware Set
  • 1 x 500W @ 4 Ohms 1 x 1000W @ 2 Ohms 1 x 2000W @ 1 Ohm
  • Features: Nickel Plated Terminals Extruded Aluminum Heat Sink Low Level Input High Level Input Low Level Output Remote Bass Knob Included Mil Spec Double-Sided Glass Epoxy Circuit Board 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 50Hz - 250Hz Variable Input Sensitivity: 200mV - 6V 45Hz Bass Boost: 0 - 12dB ATC Fuse: 30 Amp x 2
  • Product Dimensions: 7.01" x 2.09" x 6.30" (178 x 53 x 160mm)
New
Soundigital 1600.1D EVO 2.1 1Ohm Monoblock Amplifier 2089W MAX (Renewed)
  • Power per Channel Mono at 14.4V: 2089W RMS 1 ohm Mono at 14.4V: 1148W RMS 2 ohms Mono at 12.6V: 1600W RMS 1 ohm Mono at 12.6V: 880W RMS at 2 ohms
  • Output Channels 1
  • Output Impedance 1 ohm
  • Input Type RCA (low level audio)
  • Frequency Response 5 to 50000 Hz

Last update on 2021-12-08 / Affiliate links / Images from Amazon Product Advertising API

10 Best Monoblock Amplifier
Scroll to top