10 Best Hobart Plasma Cutter

10 Best Hobart Plasma Cutter

Hobart Plasma Cutter. We found more to the list of product, including some flaws. In this article, we will give you information so that you will learn about the analysis of list of products so you can get a better view of each product.

Our editors research, and recommend the best products; you can learn more about our review process here. Primeareviews earns a commission through the affiliate links at no additional cost to you.


Bestseller No. 1
Hobart - 500575 AirForce 27i Plasma Cutter
  • Dual-voltage capability with MVP (multi-voltage plug)- allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.
  • XT30R torch- Designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips
  • Fan-on-demand- cooling system operates only when needed reducing power consumption and contaminants drawn into the machine.
  • Power factor correction (PFC) circuitry - Draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
  • Postflow cooling circuit - Extends life of consumables and torch by cooling them with postflow air after trigger is released.
Bestseller No. 2
Hobart AirForce 40i Plasma Cutter, Model:500576
  • Dual-voltage capability with MVP (multi-voltage plug)- allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.
  • XT40R torch- Designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips
  • Fan-on-demand- cooling system operates only when needed reducing power consumption and contaminants drawn into the machine.
  • Power factor correction (PFC) circuitry - Draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
  • Postflow cooling circuit - Extends life of consumables and torch by cooling them with postflow air after trigger is released.
Bestseller No. 3
Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown
  • Built in Air Compressor
  • Cuts faster than oxy fuel
  • Smaller heat-affected zone for less warping
  • No gas pressure settings for flame tuning needed
  • More precise cut, thinner kerf, less slag to clean up
Bestseller No. 4
770791 Electrode & 770797 Tip/Nozzle 40A for Hobart Airforce 40i Plasma Cutter XT40R Torch Plasma Consumables(PKG-12)
  • Use With Torch Model: Hobart Airforce 40i Plasma Cutter XT30R XT40R Torch
  • Package Including: 770791 Electrode x 10pcs + 770797 Tip 40A x 10pcs + 770793 O-Ring x 2pcs
  • Item Model Number----the ref. code of electrodes is 770791 and ref. code of nozzle is 770797 the tips or nozzles will for plasma cutting process 40A
  • All 770797 tips and 770791 electrodes consumables kits are real product photo show, which will the same as you received. These plasma consumables are aftermarket parts, not original
  • The 770791 electrodes are made of copper and hafnium material, which will better electrical conductivity; Other brands used Zirconium material, which electrodes will use shorter time, and have poor electrical conductivity, not easy to start the arc
Bestseller No. 5
770791 Electrode & 770796 Tip/Nozzle for Hobart Airforce 27i 40i Plasma Cutter XT30R XT40R Torch Plasma Consumables(PKG-12)
  • Use With Torch Model: Hobart Airforce 27i 40i Plasma Cutter XT30R XT40R Torch
  • Package Including: 770791 Electrode x 10pcs + 770796 Tip 30A x 10pcs + 770793 O-Ring x 2pcs
  • Item Model Number----the ref. code of electrodes is 770791 and ref. code of nozzle is 770796 the tips or nozzles will for plasma cutting process 30A
  • All 770796 tips and 770791 electrodes consumables kits are real product photo show, which will the same as you received. These plasma consumables are aftermarket parts, not original
  • The 770791 electrodes are made of copper and hafnium material, which will better electrical conductivity; Other brands used Zirconium material, which electrodes will use shorter time, and have poor electrical conductivity, not easy to start the arc
SaleBestseller No. 6
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
  • NON-TOUCH PILOT ARC PLASMA CUTTER: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTPDC2000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33". It CANNOT compatible with Lotos PCON40 or PCON90 Consumables Sets or any other third part consumables set
  • BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
  • SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min
  • DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz): 110V-125V, Signle Phase, 50/60Hz @ 40 A input, 215V-250V, Signle Phase, 50/60Hz @ 35 A input. Recommand Crcuit Breaker Size: 50 AMP @ 120V and 40 AMP @ 240V.
  • PACKAGE INCLUDES: Power supply, Plasma cutting torch, Ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, Consumables, Instruction Manual, etc.
  • PAPST ADVANCED COOLING SYSTEM: ensure the plasma cutter have a stable and durable high performance.
  • 50 Amp Digital Inverter Air Plasma Cutter
Bestseller No. 7
FLARING Plasma Cutter 50 AMP 110V/220V 1/2'' Clean Cut Max 16MM IGBT High Frequency Inverter Plasma Cutting Machine for Car Frame,Carbon Steel,Stainless Steel,Thin Copper,Aluminum
  • [Cutting Ability] Automatic 110/220v ac-dc dual voltage,10-50A dc output, 1/2''(12mm) ideal clean cut and 3/5''(15mm) maximum severance cut on 220v;10-40A dc output, 1/3"(8mm) ideal clean cut and 2/5"(10mm) maximum severance cut on 110v.
  • [Cutting Material] Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper,cast iron and chrome.
  • [Post Time] Pre-made 3 seconds of blowing time after the torch released to cool down the torch head and consumables.Besides,the blowing time can be set by adjusting the knob. Breaker Recommendation:50A on 110V,30A on 220V
  • [Input Votage AC-DC] Dual voltage input automatic dual voltage / dual frequency (110/120 v 220/240 v 50/60hz).Air Pressure 60-70PSI suggested.
  • [Warranty Assurance] We are a manufactory with over 10 years' experience of professionals producing the plasma cutter machines,3 year's warranty.Please add to cart and take it without hesitation
SaleBestseller No. 8
2021 PowerPlasma 52i 50 Amp CNC compatible plasma cutter
  • Redesigned new PowerPlasma 52i model with NEW upgraded IPT-60 torch
  • NEW! Gouge Function. 50 Amps of professional cutting power
  • Blow-back start technology, Pilot Arc / 110/220v Dual Voltage
  • CNC port for light gauge CNC use / T2/T4 / TIP SAVER OPTION
  • Adjustable Post Flow timer of up to 60 seconds exends consumable and torch life
Bestseller No. 9
Miller Electric 907529 Plasma Cutter, Inverter, Spectrum 375
  • Occupational Health & Safety
  • Country of Manifacturer: United States
  • Manufacturer: Miller Electric
Bestseller No. 10
PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty
  • CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
  • PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
  • Blow-back start technology, Pilot Arc
  • 60% duty cycle at 60amps, 110/220 with adapter
  • Continuous Pilot Arc enables you to cut expanded, rusted, painted metals

Last update on 2021-12-08 / Affiliate links / Images from Amazon Product Advertising API


New releases on Amazon

New
Plasma Cutter Consumables, Plasma Cutter Accessories Wide Application Durable Sturdy Long Service Life Easy To Assemble Use for CUT-50 for LGK-40 for CUT-40
  • [Wide Application] These consumables are suitable for CUT‑40, for CUT‑50, for LGK‑40 accessories of for PT31 plasma cutting machine.
  • [Small Portable] This plasma cutter consumable kit are small in size, light in weight, easy to carry, easy to assemble and use.
  • [Complete Tools] The product come with 5 electrodes, 5 nozzles, 3 ceramic protective covers and 5 ceramic rings.
  • [Long Service Life] This set of plasma cutter consumables kit is made of high quality materials, sturdy and durable, and has a long service life.
  • [Convenient Practical] These plasma cutter consumables are perfect replacement parts for the old ones, which are practical and useful.
New
High Speed Welding Cart Black Welder Cart, MIG TIG ARC Welding Plasma Cutter Tank Storage, Portable 4-Drawer Cabinet & GREAT SERVISE
  • PRAGMATIC DESIGN: This item produced by the fine workmanship and sophisticated technology, which ensured the long serves life.We want to give you a great value shopping experience.
  • RIGOROUS TESTING: All products have undergone rigorous testing before being shipped to ensure their quality.If your heart touches you, start it!
  • INSTALLATION RELATED MATTERS:It's easy for you to assemble it. You can finish the installation within 11 minutes with the help of the user manual. Our products are absolutely value for money!
  • OUR SERVICE : You will love it! If you have any problem with our product, please don't be hesitate to contact us. We will replace or refund products with problems.
  • ABOUT SIZE AND PACKAGE: 28" x 15" x 28" (L x W x H)
New
Electrode Nozzle Plasma Cutter,10Pcs Electrode Nozzle Copper Plasma Cutter Consumables for PT‑60 Plasma Cutting Torch
  • 【Professional Application】 This is plasma cutting torch consumable suitable for PT‑60 plasma cutting torch.
  • 【Replacement Parts】These plasma cutting torch consumables are high quality replacement parts, easy to install and easy to use.
  • 【Copper Material】The plasma cutting torch nozzle and electrode are made of copper material, small in size, easy to carry, and long service life.
  • 【Better Performance】 This plasma cutting torch consumable has better performance, commonly used electrode and nozzle consumables for cutting.
  • 【Wide Application】This is plasma cutting torch consumable widely used for cutting carbon steel, stainless steel, aluminum, and copper.
New
Tip Electrodes, Plasma Cutter Parts Easy Replacement Copper Material Welding Nozzle for PT31 LG40 40A Torch
  • [CUTTING THICKNESS] The maximum cutting thickness is 12mm, which is suitable for more plasma cutting projects.
  • [APPLICABLE MODEL] Rated welding current is 40A, with good practicability, suitable for PT31 LG40 welding torch model.
  • [EASY REPLACEMENT] Facilitate the replacement of damaged parts during the cutting process, and smoothly complete the cutting project.
  • [PART SPECIFICATIONS] The kit includes 10pcs extended nozzles and 10pcs tip electrodes, sufficient quantity for easy replacement.
  • [COPPER MATERIAL] These nozzles and electrodes are made of copper, which has good electrical conductivity and corrosion resistance.
New
Electrode Nozzle, Plasma Cutter Consumables 10Pcs Simple Operation Copper for PT-60 Cutting Torch
  • Copper Material: The plasma cutting torch nozzle and electrode are made of copper material, small in size, easy to carry, and long service life.
  • Wide Application: This is plasma cutting torch consumable widely used for cutting carbon steel, stainless steel, aluminum, and copper.
  • Better Performance: This plasma cutting torch consumable has better performance, commonly used electrode and nozzle consumables for cutting.
  • Replacement Parts: These plasma cutting torch consumables are high quality replacement parts, easy to install and easy to use.
  • Professional Application: This is a plasma cutting torch consumable suitable for PT-60 plasma cutting torch.
New
Plasma Cutter Consumables, Copper Replacement Durable Electrode Tip Nozzle Kit Portable for PT‑80 PT‑100
  • VERY APPLICABLE: Nozzle hole diameter is 1.5mm, electrode hole diameter for 1.8mm, very applicable and practical
  • EASY TO CARRY: The plasma cutting torch nozzle and electrode are made of good quality materials, small in size, easy to carry, and long in service life
  • EXCELLENT COPPER MATERIAL: Adopt excellent copper material with fine processing, quality assurance, can be used for a long time
  • GOOD QUALITY REPLACEMENT PARTS: These plasma torch consumables are good quality replacement parts, easy to install and convenient to use
  • COMPATIBLE FOR PT‑80 PT‑100: Electrode tip nozzle kit is compatible for PT‑80 PT‑100 series plasma cutting torch
New
60A Plasma Cutter Gun, Plasma Cutting Torch Plasma Cutting Machine
  • Brass & ABS: This plasms cutter gun is made from quality brass and ABS material, which is sturdy and durable for long service life.
  • Excellent Performance: The plasma cutting torch has excellent performance, which is also very practical and stable.
  • Easy To Start Arc:The plasma cutter gun with high frequency ignition and easy to start arc, which can provide you with mroe convenience.
  • Compatible with : Standard of AG60 torch for 60A plasma cutting machine, which can work very well.
  • Practical:m This cutting torch is a practical and must‑have tool for metallurgy engineers, which can improve the cutting accuracy and efficiency.
New
Plasma Cutter Cutting Torch Gun Equipment,PT31 Straight Handle Cutter Torch for 40A 50A Plasma Cutter Machine
  • Brass And Plastic:The plasma cutter torch gun is made of high quality brass and plastic materials, this plasma torch is sturdy and durable, with good performance and powerful performance.
  • High Frequency Ignition: This plasma cutting gun has the advantages of high frequency ignition, easy arc starting and arc starting.
  • Through Professional Design: This plasma cutting gun is compatible with 40A and 50A plasma cutting machines.
  • Straight Handle : The grip is designed with a straight handle, which not only gives you a comfortable grip, but is also more convenient to use.
  • Perfect Replacement: Exquisite workmanship makes this cutting gun qualified to be a perfect replacement for old or damaged ones.
New
Plasma Cutter Consumables, High Temperature Resistance Easy Replacement 65Pcs Plasmas Cutting Electrode Tips Kit for Stahlwerk CT512P Welding Guns
  • Ceramic + Copper: Plasma cutting consumables are made of ceramics and copper are durable and high temperature resistant.
  • Easy to Use: This is an easy to use plasma cutting consumable, suitable for plasma cutting machine.
  • Perfect Substitute: This is a perfect substitute, easy to replace, and complete the cutting project more smoothly.
  • Good Welding Performance: Good welding performance, providing high quality strength and durability.
  • Application: Suitable for Stahlwerk CT312, CUT50, ACDC TIG200 plasma, CT520, CT512P and PT-31 welding guns.
New
Plasma Cutter Consumables, 10PCS Plasma Cutter Accessories Heat Resistant for Professional Use
  • The protective cup of the plasma cutting machine adopts precise CNC processing, standard size, and stable performance.
  • This ceramic plasma cutter shielding cup is very suitable for AG60F plasma cutting.
  • This ceramic shielding cup is made of high quality ceramic materials, heat resistant and durable.
  • The old or damaged porcelain nozzle can be directly replaced to maintain the best performance of the plasma cutting torch.
  • The protection cup of our plasma cutting machine has a long service life and is not easily damaged.

Last update on 2021-12-08 / Affiliate links / Images from Amazon Product Advertising API

10 Best Hobart Plasma Cutter
Scroll to top