Skip to content

Esun Filament Dryer

Esun Filament Dryer. We do the research ourselves by analyzing reviews and ratings from customers, to help you purchase wiser to avoid buyer’s remorse. please choose them wisely

Table of Contents show

Our list of the Esun Filament Dryer


eSUN PETG Refill Filament for eSUN Reusable spools 1.75mm Solid Black

 out of stock
Amazon.com
as of May 30, 2022 10:14 am

Features

Part NumberR-PETG175SB1
ColorSolid Black

eSUN PLA-LW PLA 3D Printer Filament, 1.75mm 1KG Spool Lightweight Strong Paint Adhesion Foaming PLA Filament for 3D Printers 3D Printed Airplane, Natural

 out of stock
Amazon.com
as of May 30, 2022 10:14 am

Features

  • 【Low density & High Foaming Volume Ratio】ePLA-LW has applied active foaming technology to achieve lightweight, low-density PLA parts. The highest foaming volume ratio is 220%, and when printing the same volume model, 1 roll of ePLA-LW can be used as 2.2 rolls of ordinary PLA. Density is only 0.54g/cm3.
  • 【Clog-free & No Warping & Less-tangle 】Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and snapping.eSUN ePLA-LW filament is orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder.It does not overlap or tangle,no cracking. It has an excellent printing successful rate for large printing models and don't need a constant temperature chamber.
  • 【Easy to Paint & Wide Application】eSUN ePLA-LW lighweight PLA filament is very easy to paint and has a strong adhesion of surface paint. So it is a good choice for model airplanes, drones, and COSPLAY props.
  • 【Good Interlayer Adhesion & Matte Printing Effect】 Compared to wood PLA filament,ePLA-LW filament has more stable interlayer adhesion, and the foaming rate and strength can be controlled by adjusting the printing temperature between 210℃-270℃. Printing models is explosion resistant and easy to repair with delicate matte surface effect.
  • 【Foaming When Printing】At around 210°C-270°C, this filament starts to foam during printing, increasing its volume by nearly 1.2 times, and the printing extrusion rate can be reduced to 45% to print lightweight parts. For same model and printing speed, ePLA-LW enables the model aircraft to have a lighter wing load and a lower stall speed. For models such as airplanes, under the condition of balanced strength, reducing the weight can greatly improve the performance of the airplane.

eSUN eBOX 3D Printer Filament Dryer Box Storage Holder Keeping Filament Dry Support Measuring The Filament Weight for 3D FDM Printer

 out of stock
Amazon.com
as of May 30, 2022 10:14 am

Features

  • ※1.【eBox Filament Storage Box】Designed to keep filament dry and dehumidify various kinds of filaments, especially those moisture-sensitive filaments. Provide a dry storage environment for 3D printer filament.
  • ※2.【Keep Filament Dry】Designed to lay in your filaments and dehumidify to keep them dry. Made of high-temperature resistant material, it can bake your filament at a designated temperature for hours.
  • ※3.【Measure Filament Weight】Freely set the drying heating time, temperature, and empty disc weight for your needs. Monitor the temperature inside the box and remaining material weight timely.
  • ※4.【Comprehensive Dust-proof】Sealed protection, comprehensive dust-proof, and no impurities. With Special tank for dryer bag and Anti-slip footpad, which is convenient for recycling.
  • ※5.【Energy Saving】Equipped with an LED screen, the light can be turned off automatically to save power. Great companion for any 3D FDM printer.

eSUN EBox 3D Printer Filament Dry Box, Filament Dryer Storage Enclosure 1.75mm 3D Filament Storages dehydrator of Filament Dryer Box Filament Spool Holder for Keeping 3D Filament Dry

 out of stock
Amazon.com
as of May 30, 2022 10:14 am

Features

  • ⭐【Good Sealing】Sealed protection, comprehensive dust-proof, and no impurities, which reduces the exposure of filaments to air, prevents filaments from becoming brittle, and reduces the waste of filaments.
  • ⭐【Widely Used】Suit for all 3D printers, Universal Adjustable Filament for PLA/ABS/Nylon/Wood/TPU/Other 3D Printing Material
  • ⭐【Measure Filament Weight】Freely set the drying heating time, temperature and empty disc weight for your needs. Monitor the temperature gear inside the box and remaining material weight timely.
  • ⭐【Feed Smoothly】The 3D filament dryer enclosure comes with a support frame and bearings, so that the 1.75mm filament is feed more smoothly, and printing can also be done by keeping the 1.75mm filament in the 3D filament enclosure.
  • ⭐【[High-Quality Filament Dry Box】The filaments dried in the filament drying oven of the eSUN EBox 3D printer have better printing quality, smoother surface, and increased interlayer adhesion. We also provide high-quality after-sales service technical support. If you have any questions, please feel free to contact us.

eSUN eBOX 3D Printing Filament Storage Box for Dehydrating, Weighing and Keeping Filament Dry

 out of stock
Amazon.com
as of May 30, 2022 10:14 am

Features

  • Keep your filaments in tip-top shape: 3D printing materials are susceptible to moisture in the air. When these materials become wet, you would only end up with poor quality prints and frustration. eSun eBox filament storage dryer makes it possible for you to easily dry your 3d printing filaments and protects them from moisture and dirt, allowing you to start your printing projects without issues like stringing, clogging and poor adhesion.
  • Comprehensive Protection: A guide tube is included to prevent dust from the filament during printing, in combination with the enclosed design and a silica gel compartment, This eSun Filament Dyer giving your filaments comprehensive protection.
  • Efficient Heating: The maximum operating temp for this dryer is up to 80°C, which allows you to dry more materials with much less time. Supported materials include PLA/PLA+, PETG. ABS/ABS+, PVA, Nylon and PC. It also has lower power consumption compared to other filament dryers.
  • Built-in Weight Scale: The eSUN dryer box can weigh the filament coil and show how many grams of material you have left.
  • Wide Cpompatibility: Compatible with fiaments with different spool size. (1.75mm/2.85mm/3mm)

EIBOS Filament Dryer, 3D Printer Filament Dry Box with Fan, Adjustable Timer & Temperature Humidity Control, Compatible with Nylon PVA PLA PETG TPU 1.75mm 2.85mm 3.00mm, Storage Box

$149.99  in stock
Amazon.com
as of May 30, 2022 10:14 am

Features

  • 【DRYER & STORAGE BOX】the dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposing. Filament can be used while in the box, the dryer function as both storage box and filament holder. Sealed protection, comprehensive dust-proof and damp, no impurities
  • 【ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR】adjustable heating temperature to accommodate needs of various filaments, actual and setting temp are displayed on the LCD indicator. Please follow the adviced temperature to set the mode, otherwise it will be melted.
  • 【COMPATIBLE WITH MULTIPLE SPOOLS】filament dryer box works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PETG , Wood, ABS, Silk, etc. Extra large space allows usage 4 rolls of 0.5kg filaments, 2 rolls of 1kg filaments, 1 roll of 3kg filament at the same time, it has two built-in rotating shafts that allow the filament to continuously rotate in a dry hot box to remove moisture
  • 【REVIVE YOUR BRITTLE FILAMENT】filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new unit. No plastic strings and clogging, no need worry about your old left out spools, this dryer box can help revive them easily
  • 【100W PTC HEATER】Different from applying ordinary heater 48W PI heating pad to heat up space, our product use 100W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly

eSUN Enhanced Carbon Fiber Filled Nylon Filament 1.75mm, Upgraded PAHT CF 3D Printer Filament, 0.75KG Spool 3D Printing Filament for 3D Printers, Natural

$70.99  in stock
Amazon.com
as of May 30, 2022 10:14 am

Features

  • 【Enhanced Carbon Fiber Filled Nylon】85% LUVOCOM Nylon 6 (PA6) Coupled with 15% Carbon Fiber. Higher Strength and Rigidity. Better Toughness. Wear Resistance. High Mechanical Strength. Heat Resistance 240°C. Continuous Use Temperature 150°C.ePAHT-CF material are easy to absorb water, please dry it at 70℃ more than 12H before printing.
  • 【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, no bubbles, extremely high successful rate, resulting in an outstanding surface finish and are highly precise.
  • 【Tangle Free & No Plugging】0.75KG 3D printer filament , perfect roundness and very tight diameter tolerance, does not overlap or tangle, less stringing, strong layer adhesion. Melt well, feed smoothly and constantly without clogging the nozzle or extruder. ePAHT-CF is highly rigid, which also means it is easy to break, so please pay attention not to bend the filament when it is in the feeding tube.
  • 【Wide Application】Compared with ordinary carbon fiber filled nylon (PA-CF) filament, it features with higher toughness and better impact resistance, higher heat resistance and wear resistance. Widely used in automobile industry, defense industry, aerospace, cultural and sports fields, etc.
  • 【Vacuumed Sealed Packaging】1KG Spool Enhanced Carbon Fiber Filled Nylon Filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.

eSUN eBox 3D Printer Filament Dryer Box, Filament Dryer Storage Enclosure, eSUN Filament Dehydrator Dry Box Keep Filament Dry During Printing Filament Holder for 1.75mm 3.00mm SUNLU PLA PLA+ ABS

$59.99  in stock
Amazon.com
as of May 30, 2022 10:14 am

Features

  • ❤【Keep Filament Dry during 3D printing】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. 3D Filament Dryer box can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.
  • ❤【Comprehensive dust-proof,moisture-proof】eSUN eBox adopts fully sealed process,excellent sealed protection,no impurities,which solves the problems of PLA and other consumables directly exposed to the outside and easy to get dust and moisture, which increase the life of consumables.
  • ❤【Measure Filament Weight】Freely set the drying heating time, temperature and empty disc weight for your needs. Monitor the temperature gear inside the box and remaining material weight timely.
  • ❤【Compatible with 99% of 3D Filament Spools】 3D filament storage dryer box s uitable for consumable tray with diameter less than Φ210*85(H)mm and works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm. In the meanwhile,it Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC .
  • ❤【24 Months Guaranteed After-Sales Service】We will provide a long-term warranty service of up to 24 months ,Please d on't hesitate to contact us at any time ,we will reply you promoptly within 12 hours. If you are about to buy a filament dryer s torage enclosure for your PLA , why not Come to buy one and try?

eSUN eBOX Lite Upgraded 3D Printing Filament Dryer Box, Filament Storage Box, Spool Holder for Keeping 3D Printing Filament from Moist and Keeping Filaments Dehydrating, US Power Supply

$54.99  in stock
Amazon.com
as of May 30, 2022 10:14 am

Features

  • 【Upgraded eBOX Lite Dryer Box】Moisture can cause printing failure, our eBOX Lite dry box is designed to keep filament in constant temperature and humidity, especially for those hygroscopic filaments. It can remove the excess moisture, keep the filament dry.
  • 【Efficient Heating & Even Temperature】Upgraded Built-in PI heating Arc Sturcture and insulation cotton surrouding structure, eBOX Lite filament dryer box can heating fialment evenly and temperature inside the box can effectively reach 50℃-55℃ in just 2 hours. Besides, it can maintain constant temperature and humidity all the time.
  • 【Low Noise & Storaging】This storage dry box has applied upgraded long-life low-noise turbo fan, which can provide a quiet working environment even at night. Also it can provide a dry storage environment for filament.
  • 【High Compatibility】Maximum capacity of the Dry box is 200*73mm, it works perfectly with 1.75mm/2.85mm/3.00mm diameters filament in 0.5kg/0.75kg/1kg. Transparent lid design is easy to check the filament without open the lid.
  • 【Easy to Use】This dry box is very easy to use and have a inside temperature range between 40℃ -55℃. It is temperature setting mode when press mode button setting from 1-3 by up/down button and mode button again for setting heating time from 0-18h.

eSUN eBOX 3D Printing Filament Storage Box, Filament Storage Holder, Spool Holder for 3D Printing Filament Dehydrating, Weighing and Keeping Filaments Dry (US Power Supply)

$50.99  in stock
Amazon.com
as of May 30, 2022 10:14 am

Features

  • 【eBox Storage Box】Designed to keep filament dry and dehumidify various kind of filaments, especially those moisture sensitive filaments. Provide a dry storage environment for filament.
  • 【Keep Filament Dry】Designed to lay in your filaments and dehumidify to keep them dry. Made of high temperature resistant material, it can bake your filament at a designated temperature for hours. If you have problem in heating , please feel free to turn to us.
  • 【Measure Filament Weight】Freely set the drying heating time, temperature and empty disc weight for your needs. Monitor the temperature gear inside the box and remaining material weight timely.
  • 【Comprehensive Dust-proof】Sealed protection, comprehensive dust-proof, and no impurities. With Special tank for dryer bag and Anti-slip foot pad, which is convenient for recycling.
  • 【Energy Saving】Equipped with LED screen, the light can be turned off automatically to save power. Great companion for any 3D FDM printers.Any problem, please feel free to contact us.

Upgraded 3D Printer Filament Dryer Box, SUNLU Filament Dehydrator Dry Box, Keep Filament Dry During 3D Printing, Spool Holder,Compatible with 1.75mm, 2.85mm, 3.00mm Filament,Storage Box

$49.99  in stock
Amazon.com
as of May 30, 2022 10:14 am

Features

  • ①【Keep dry, good printing effect】Dust-free, moisture-free. 3D printer filaments are hygroscopic, moisture can cause printing failure, SUNLU filament dryer box help to dry excess moisture, keep the filament dry, no more brittle PLA, PETG, ABS filament.
  • ②【Fully assembled and easy to use】SUNLU dry box is simple to operate, turn on by hit either button, hold the left button to change the dry time, press the right button to change the temperature setting. SUNLU dryer box can be used as a spool holder. The bearings that hold the filaments are very stable and allow the filament to roll steadily.
  • ③【Simple but Effective】The print quality will be better if using filament dried by SUNLU filament dehydrator box, surface smoother, layer adhesion increased. It can be more helpful if you live in a humid temperature zone.SUNLU filament dryer box is easy to open and the lid is transparent allowing direct inspection of the length of filament remaining in the box.
  • ④【High Compatibility】The adjustable temperature(time) range is 35-55℃(0-24hours), SUNLU dryer box can bake most types of 1KG filament at a designated temperature for hours. Maximum capacity of the drying oven: 210*85 mm, can accommodate filament diameter: 1.75mm/2.85mm/3mm.
  • ⑤【Good After-Sales Service】After-Sales Service and Technical Support are provided. If you have any questions about SUNLU filament dehydrator box, don't hesitate to contact us.

Upgraded Dryer Box of 3D Printer Filament, SUNLU 3D Filament Dryer Box S1, Keeping Filaments Dry During 3D Printing, Filament Holder, Compatible with 1.75mm, 2.85mm, 3.00mm Filament, Storage Box

$49.99  in stock
Amazon.com
as of May 30, 2022 10:14 am

Features

  • 【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.
  • 【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market
  • 【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect.
  • 【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc.; C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm.
  • 【User-friendly Design&1 Year Guaranteed After-Sales Service】 A: The design of two rollers inside the box allows you to print while drying; B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work; D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing

YOOPAI Filament Storage Bag Vacuum Kit - 20Pack Cleaning Drying Sealed Bags (Plastic 13.2 x 12.7inch) for 3D Printer Filament, with Desiccants / Humidity Indicator Cards / Hand Pump

$22.99  in stock
2 new from $22.99
Free shipping
Amazon.com
as of May 30, 2022 10:14 am

Features

  • Ideal Solution for Dust & Water Proof: with double seal zipper and micro-porous design, this YOOPAI compression container provides a provides a closed and dry storage space for your products.
  • Efficient Vacuum Kit: with self-sealing valve on the storage bag and a tiny hand pump, YOOPAI allows you to create a vacuum state for your filaments in a few seconds to keep them in tip-top shape and portable.
  • All-round Moisture Monitoring: cobalt-free humidity indicator cards go for having a quick view of the humidity level of your filaments without opening the bags; the included desiccant serves as a double insurance for a dry space.
  • High Quality & Broad Compatibility: maded of food grade PE+PA composite material, this BPA-free environment friendly storage bag is safe, durable and recyclable; especially designed for 3D printer filament of 0.5KG/0.75KG/1KG and 1.75mm/2.85mm/3mm. It can also used for food or other material storage.
  • More Bags in Package: one YOOPAI vaccum kit includes filament storage Bag × 20, Hand Pump × 1, Sealing Clip × 5, Desiccant × 5, Humidity Indicator × 5.

eVacuum 3D Printer Filament Storage Bag Vacuum Sealed Bags Vacuum Compression Storage Bags, Prevent and Monitor Moisture - 10 Bags with 15 Desiccants, 15 Humidity Indicator Cards and 1 Hand Pump

$20.99  in stock
Amazon.com
as of May 30, 2022 10:14 am

Features

  • Comprehensive Vacuum Storage Kit: The state of the filament you use is the key to the quality of your prints, the eVaccum 3D Printer Filament Storage Kit allows you to keep your filaments in tip-top shape with ease.
  • Protects from Moisture: Durable vacuum compression bags, heavy-duty valve, and double seal zipper for airtight protection.
  • Easy Monitoring: Clear vacuum bags, together with cobalt-free humidity indicator cards enables you to have a quick view of the humidity level of your filaments without opening the bags.
  • The humidity indicator cards can be reused after drying with oven or hair dryer.
  • What's included: Hand Pump × 1, Vacuum Bag × 10, Sealing Clip × 2, Desiccant × 15, Humidity Indicator Card × 15

eSUN 3D Printing Filament Vacuum Storage Kit, Spool Storage Sealing Bags Dust Proof Humidity Resistant for Keeping Filament Dry, 10 Vaccum Bags / Kit, 33 x 40cm

$19.99  in stock
Amazon.com
as of May 30, 2022 10:14 am

Features

  • 【Package List】One eSUN vaccum kit includes Vacuum Bag*10, Hand Pump*1, Sealing Clip*2, Desiccant*15, User Manual *1. One kit 43pcs in total, which can satisfy storaging 10 used filaments at the same time.
  • 【Humidity Resistant & Good Sealing Effect】The vaccum bags apply bilateral sealing and single side embossed design,which is good for dust proofing and humidity resisting of filament with high water absorption like PVA、ePA、ePA-CF、ePA-GF、ABSMAX、TPU-95A.Hand pump saves your time and improve the efficiency.
  • 【High Compatibility】eSUN vacuum bags are especially designed for 3D printing filament and is compatible for all 0.5KG/0.75KG/1KG filaments and 1.75mm/2.85mm/3mm filament.It can also used for food or other material storage.
  • 【Recyclable & Sensitive Humidity Indicator】Unique recyclable and sensitive humidity indicator design. Easy to observe the humidity of filament while storaging in the vaccum bags.Indicator will show blue in high humidity and it can be reused after drying by oven or hot air(But may effect the sensitivity ).
  • 【Safe & Environment-friendly】eSUN filament vaccum bags are BPA-free, which is totally safe and environment-friendly.eSUN vaccum bags is made of food grade PE+PA composite material,durable and recyclable.

eSUN Cleaning Filament 1.75mm, 3D Printer Cleaning Filament, Prevent Nozzles and Extruders Clogging, 100g Spool 3D Printing Filament for 3D Printers, Natural

$11.99  in stock
Amazon.com
as of May 30, 2022 10:14 am

Features

  • 【Cleaning Filament】Environmentally Friendly and Non-toxic. Keep your 3D printer nozzle in good health, clean between different material and color changes to extend nozzle life.
  • 【Prevent from Clogging】Designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament. It can clean a variety of 3D printer materials.
  • 【Easy to Use】Wide Cleaning Temperature Range 160°C-300°C. Clean the nozzle and extruder of 3D printer regularly, ensure feed smoothly and constantly without clogging.
  • High Compatibility】Perfect for multiple material including PLA, ABS, PETG etc. 100g(0.22 lbs) 3D printer cleaning filament is vacuumed sealed and comes with desiccant.PLEASE NOTICE THAT CLEANING FILAMENT CANNOT PRINT AS NORMAL FILAMENT.
  • 【When to Use】Before and after printing, change matrial with different melt point, colors and properties for better extruder protection and printing effect.With a certain level of adhesive ability, adhesive accumulated residual filaments and take them out to clean the interior extruder.

As an Amazon Associate, We earn a small commission from qualifying purchases at no added cost to you.

New products list:

Last update on 2022-06-20 / Affiliate links / Images from Amazon Product Advertising API


Last updated on May 30, 2022 10:14 am

As an Amazon Associate, We earn a small commission from qualifying purchases at no added cost to you.

What to consider before purchasing the Esun Filament Dryer.

For a few countries like the United States of America, the customers prefer to purchase many varieties of products from Amazon.
Amazon supplies a variety of products with credible platform.
Buying form Amazon is like buying directly from the manufacturer.

Amazon.com works as a third-party and tied with manufacturers worldwide.
Amazon describes Esun Filament Dryer products with a clear explanation provided by its manufacturer. These information can help shoppers make the right decision easier.

The guide provides information about the specifications of the Esun Filament Dryer you want, such as its pros, features, size, function, and brand.
If shoppers want a Esun Filament Dryer with any specific features, purchasing from Amazon is the best location or platform.
A list of products will appear on your laptop or monitor or Android phone as soon as you type in the features you prefer.

Choosing The Right Esun Filament Dryer

1. Select the right spec. Browse through the category at Amazon, and you will see a whole host of specifications.
As a useful shortcut, just look at the prices. It will often tell you which products are more reliable or durable or powerful than others. It helps to know a little bit about what you are dealing with.

2. Look at customer satisfaction. See which products has the best rating. The best rating (usually between 0-5 or 0-10 scale) can help you understand how the product performed according to customer’s review.

3. Check the brand or manufacturer score. Less known manufacturer or brand tends to provide lesser quality product. Overtime, customers will provide feed backs which product performed the best.

4. Customer reviews. It would be the most important factor to consider. Customers leave feedback regarding their experience with the best Esun Filament Dryer they purchased from Amazon.
Every single review posted, it will help you to know whether the best Esun Filament Dryer you want to buy good or bad.

We hope our recommendation can help.

———————————-

PrimeaReviews is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
As an Amazon Associate, We earn a small commission from qualifying purchases at no added cost to you.