10 Best Dikes Tool

10 Best Dikes Tool

Dikes Tool. The diagonal wire cutter, or dike tools, is a type of plier used to cut or snip wire and small fasteners.

In addition to pulling staples, small nails, and tack strips from wooden floors and furniture, they also serve as staple puller pliers or tack removers. In addition to the pointed tips, the slightly bent heads provide leverage for prying out staples and tacks.

Diagonal cutters are primarily responsible for cutting. The sharp edges of these blades allow them to cut through wires and other objects with ease.

But, after prolonged use, the cutters become blunt and cease to cut effectively or are unable to do so. The tool must either be sharpened or replaced if its edges have become dull.

We found more to the list of product, including some flaws. In this article, we will give you information so that you will learn about the analysis of list of products so you can get a better view of each product.

Our editors research, and recommend the best products; you can learn more about our review process here. Primeareviews earns a commission through the affiliate links at no additional cost to you.

Last update on 2022-09-13 / Affiliate links / Images from Amazon Product Advertising API

New releases on Amazon

Last update on 2022-09-24 / Affiliate links / Images from Amazon Product Advertising API

What are dikes tool?

This tool, also known as Dykes tool or Diagonal pliers, is primarily used for cutting wires. In addition, it is sometimes referred to as a wire cutter.

The points of dikes are usually pointed. An old adage states that when in doubt, dig it out. Our article will examine the best and most cost-effective dikes tool for electrical professionals in order to cut wires.

The name dam is derived from diagonal cutters, which are also known as side cutters. The wire is wedged and pushed apart to form dikes.

This instrument is preferred over scissors for shearing operations.

What are cutting pliers called?

As opposed to shearing, they cut wire by indenting and wedging the cable apart. According to the name, the jaws’ cutting edges are set at an angle (hence the name “diagonal”).

In addition to side cutters, flush cut pliers, side cutting pliers, wire cutters, and diagonal cutting nippers, these tools are also referred to as side cutters.

How to use dikes tools?

  1. Open jaws. Grip the handles in your hand and open them. Some dikes tools are spring loaded and open automatically.
  2. Position pliers. For gripping, get the flat parts of the jaws into the good position either side of the item to be gripped.
  3. Close jaws.

Benefits of dikes tool

It is believed that pliers or dikes tool originated from tongs used to handle hot metal in Bronze Age Europe. As well as bending and compressing materials, they are also useful in many other applications. You can cut wire or nail with this tool.

What are common types of pliers (dikes tool) and wire cutters?

1. Side cutting (lineman‘s) pliers

The proper use is applications include electrical, communication, and construction. Suitable for gripping, splicing, and cutting wires and stripping insulation.

2. Long nose pliers

It is used for holding small objects, reaching awkward places, bending loops, and attaching wires. Typically used for smaller gauge wire.

3. Utility pliers

Suitable for gripping round, square, flat, and hexagonal objects. It is capable of applying limited torque (twisting force) without damaging the work.

4. Diagonal cutting pliers

This position involves cutting and skinning wires, removing nails, pins and other fasteners.

5. Flat nose pliers

Various applications and assembly tasks may require the use of these pliers. Wires may be gripped, twisted, and bent with these tools.

6. Slip joint pliers

This tool is for adjusting bolts or nuts.

7. End cutting pliers

You can use it to cut wires, nails, and rivets close to your work area.

8. Crimping Pliers

This type of tool is also known as a crimping tool. Unlike nutcrackers, these pliers have their fulcrum at the end. Wires are fed into the jaw’s jack, followed by connectors.

By squeezing their handles, you will break through the plastic coating, crimping or deforming the sections so that they will stick together, allowing data to pass through.

Their main application is in telecommunications and networking. For example, terminal crimpers are often used in automotive, while R145s are commonly used in computers.

9. Hose Clamp Pliers

They are also known as hoses, radiator hoses, or spring clamp pliers. Pliers of this type are designed for compressing springs and hose clamps to make them tighter. As a result, they are available in a range of designs.

The most common models have teeth in the shape of pegs on each jaw, and these are intended to hold the clamp tightly in place. However, some models may also be used directly on hoses.

10. Needle Nose Pliers

Since their nose is elongated and offers greater precision, these pliers are also called long-nosed pliers. Near the base of the nose there is also a cutting edge.

Besides their versatility, these pliers can also be used for shaping, cutting, and bending wires.

Many trades utilize these tools, such as electrical work, jewelry making, fishing, network engineering, and so on. Most homeowners own them in their toolboxes.

11. Snap Ring Pliers

Additionally, they can also be called retaining ring pliers, lock ring pliers, circlip pliers, and C-clip pliers.

A pair of pliers with round, short jaws is used for closing snap rings. Snap rings are loops with open ends that fit into round objects such as dowels.

When closed, the ring can be rotated freely, but it cannot be slid sideways. They are often found on mountain bikes and other vehicles with gears.

12. Tongue & Groove Pliers

Additionally known as channel locks, these pliers are adjustable and feature toothed grooves along their upper handles. The toothed grooves allow the pliers to lock the lower jaw into a variety of positions. Its angled jaws make it useful for turning bolts and nuts.

13. Bail Making Pliers

The jaws of this tool comprise a pair of dowels, one of which is larger. Wire is typically used in jewelry manufacturing to form ear wires, clasps, and many other loop components.

14. Battery Pliers

These kinds of pliers are primarily used for maintaining bolts on jumper cables and car batteries. Their jaws are angled and short. The lower jaw is smaller, and the upper and lower jaws are more robust due to their thickness.

15. Bent Nose Pliers

This is another type of needle nose comb. The angle of their jaws is usually at 45 or 90 degrees at their midpoint.

Thus, they can grip surfaces without becoming a hindrance when you require multiple pliers. Additionally, this is useful when the angle is difficult to reach with a traditional needle nose plier.

As wire shapers, they are frequently used in electrical work, jewelry making, and other types of work.

16. Brake Spring Pliers

The drum brake spring tool is another tool commonly used in automobiles, which is specifically designed for handling drum brake springs. A rounded part of one jaw is used to remove the springs, and a curved part is used to reinstall them.

One handle may also include a ratchet for removing the shoe hold-down pins.

17. Canvas Pliers

Canvas stretching pliers are also known as canvas stretching tools. The pliers are frequently used by artists and they permit a single individual to accomplish what often requires two.

They are usually padded to prevent damage to the canvas while it is being stretched onto your frame.

18. Chain Nose Pliers

In jewelry making and wire shaping, these pliers have stubby triangular jaws. As a result of the design of the jaw, wire can be shaped, bent and crimped.

You can use their tips to open and close jump rings and bead tips when making beaded jewelry.

19. Combination Pliers

In their jaws, combination pliers feature three sections that serve as multi-purpose tools. They have serrated surfaces on their tips that facilitate gripping.

On the back of the tool is a round serrated section which makes it easier to grip round items such as tubes.

The cutting surface is the section located closest to the fulcrum of the pliers. The lineman pliers are often mistaken for lineman pliers, however, they do not have the rounded center of the jaws.

20. Eyelet Pliers

The clothing industry, such as tailoring and knitting, uses these pliers. Eyelets facilitate the attachment of laces and drawstrings to clothing. In order to crimp the rings and hubs of eyelets.

They must be elongated.

Almost all eyelet pliers feature interchangeable dies for crimping and punching. However, some have just a wheel in their upper jaw that holds the die tips or only have a surface for crimping.

21. Fencing Pliers

Looking at the tool from above, it appears to be a hammer with two handles. There are notches on the fulcrum which allow you to cut different gauge wires, and a hammer surface on the left jaw allows you to drive staples.

In addition to a claw on the right jaw, the jaws also contain rounded grip holes and gripping surfaces for removing staples.

22. Grommet Pliers

In both form and function, these are similar to the eyelet pliers, and they are used to create holes in materials, such as tarp, and to attach grommets.

In comparison to eyelets, grommets are much more durable, making them ideally suited for crafts that require the use of strong materials.

23. Hose Grip Pliers

A special type of plier, these grabber pliers are designed for removing small hoses from tight spaces with ease. As a result of their grasper jaws and shaped.

They prevent the hose from getting damaged. They are used for things such as fuel lines, heater hoses and vacuum lines.

The hose can be turned on or off by simply twisting it. Spark plugs, clamps, and many other small items can be mounted on them.

24. Locking Pliers

Alternatively, these are referred to as vice grips. These pliers have jaws that lock. It makes them ideal for gripping screws and bolts that have been stripped.

They are available in a wide variety of jaw shapes. You can select the design that is most appropriate to your needs.

25. Nail Puller Pliers

The tapered tips of these instruments resemble tongs. This enables the pliers to dig beneath a nail’s head and remove it.

Some of the varieties are equipped with claws on the back of their right jaw to provide you with more power.

26. Oil Filter Pliers

There is something odd about this type of plier. The toothed jaws of these animals are C-shaped, and one of them is significantly longer than the other. These jaws are used for removing oil filter casings.

27. Piston Ring Pliers

This type of pliers comes in two major types, and both are used for removing and replacing piston rings inside engines. The first type has curved tips on its jaws that the person can use for spreading piston rings so they can easily be removed.

The other type boasts jaws that are much larger and a few braces to provide support for the ring and reduce the risk of warping.

28. Push Pin Pliers

A wedge-shaped jaw tip is present on these pliers. These pliers are capable of getting underneath plastic anchors’ pin caps. With a squeeze of the pliers, a push pin is released, which enables the anchors to be safely removed.

The anchors are widely used in the automotive industry, as well as in many other types of industries.

29. Round Nose Pliers

In addition to these, rosary pliers and jewelry pliers are also available. Their jaws are slightly tapered and they are not to be confused with bail making pliers. A triangular jaw design results as triangular design.

They are used to make jewelry loops, including rosaries. With some of them, you can use insulated handles to work with electrical equipment.

30. Sheet Metal Pliers

These pliers are also known as seamer pliers because they have wide rectangular jaws and can be used to bend sheet metal as well as form seams. A metal shop, for example, is a common place to find them when sheet metal is in use.

31. Split Ring Pliers

These are also referred to as fishing pliers. Their lower jaw is hooked and they resemble stubby needle nose pliers or chain nose pliers.

As a result, the rings are split apart by acting as a wedge. Fishing tackle is often made with split rings. Key chains are also commonly made with split rings.

32. Soft Jaw Pliers

Divers and plumbers use these pliers, which are often composed of more than one type of plier. They differ primarily in that their jaws are padded to avoid scratching exposed surfaces or soft metals.

33. Spark Plug Pliers

Generally, these pliers have narrow jaws, and they are either tipped with cylindrical holders or insulated tongs. The pliers assist when repairing automobiles by gripping the spark plugs either by the plug wires or the boot.

These pliers have narrow jaws that are capped with insulated tongs or cylindrical holders. These tips help in the repair of automobiles by gripping spark plug wires or boots.

34. Welding Pliers

A welding pliers’ jaws are similar to combination pliers, and they have needle nose pliers’ tips.

In addition to gripping wire, hammering, removing spatter and gripping wire, this type of tool can perform many functions. The welding industry relies heavily on these tools.

35. Wire Twisting Pliers

They have short jaws, and they are unusual. The jaws also feature an edge for cutting at the fulcrum. There are threaded knobs and cylindrical locking mechanisms between their handles.

Locking a wire piece into their jaws and pulling the knob back will cause the entire tool to spin and the wire to twist in tandem with it. In the jewelry industry, they are frequently used. Also, they are frequently used by electricians.

What are important electrician tools?

1. Circuit finders.

It is sometimes difficult to determine which outlets are connected to which circuit in a home. A circuit finder is a device that consists of two main components: a handheld digital transmitter and a small receiver that plugs into outlets around the house.

The circuit finder provides a list of which outlets belong to which circuit.

2. Insulated Gloves

Electric shock can result in death or serious injury. Considering the possibility of these incidents occurring on any given job site, electricians must take precautions. It is recommended that electricians wear insulated gloves whenever possible.

3. Safety glasses

Electrical workers, whether they are starting their first job or have worked for a number of years, should always carry a pair of safety glasses with them. Protecting your eyes should be a priority whenever electricians inspect wiring or use power tools.

4. Reaming Bit

When creating a wiring route between electrical components, you connect different segments of piping together. To install a new conduit or replace an old conduit, you connect different segments of piping together.

An electric drill is equipped with a reaming bit that allows the opening to be widened, enabling a secure conduit to be completed by connecting one section of piping to another.

5. Flashlights

Eventually, you will be forced to work in the dark as an electrician. It is not uncommon for electricians to carry flashlights or other work lights in their vehicles in case such a situation arises.

6. Conduit Bender

Electricians typically plan to route wiring along the corner of the wall in the area in which they are working. Electrical conduit benders enable electricians to bend conduit piping.

They can follow these routes and ensure that all conduits remain out of harm’s way.

7. Voltage Tester

Electricity must be turned off in certain areas of the property before electrical work can begin safely. With a handheld voltage tester, electricians can determine whether outlets are operational and when the power has been restored to the homeowner.

8. Electric Drill

A power drill is often used by electricians to install or disassemble lighting fixtures, wiring, or other electrical components. As an electrician, it is common for them to install lighting fixtures or access electrical wiring with the aid of this tool.

9. Screwdrivers

Throughout their careers, electricians will need a variety of screwdrivers to loosen and fasten various pieces of hardware. It is common for professionals to carry adaptable screwdrivers with interchangeable bits so they are never without the necessary electrical tools.

10. Tape Measure

It is vitally important for electricians to understand the length of the pieces they are cutting and stripping when working with wiring. The most common tape measure for field use is a retractable tape measure.

But there are more advanced tape measures available on the market that will facilitate the process.

What are signs of dull wire cutters or side cutters or dikes tool

A blunt side cutter indicates it needs to be resharpened if:

  • With the cutters, simultaneous cutting is not possible.
  • Instead of cutting the wire, the blades press it.
  • After cutting an object, the cutters leave tails on both sides.
  • This results in a flat, dull cutting edge.
  • Rust coats the cutting edge.

The pliers should be replaced if the blades are too nicked or do not close properly. Additionally, if the cutters do not come together when the jaws are closed, you may need to replace the dykes.

In this instance, the jaws are bent and cannot produce a clean cut even if the blades are sharp. It is also possible to determine whether the jaws are bent by closing the jaws and looking at them from the tip.

When the jaws are straight, the tips will line up.

The importance of purchasing a quality dikes tools and avoid low quality ones

1. Capacity of cutting

You will be able to find out what size wire can be cut by calculating the cutting capacity based on either the wire gauge or the diameter of the cable (excluding the thickness of the insulation).

2. Material of the blade (hardness)

Depending on the blade material, certain metals can be cut. Due to the fact that electrical cables are almost always made of aluminum and copper, many wire cutters only function with these materials.

You should ensure that the cutter you select is rated for cutting steel cable if you need to cut steel cable. Failure to do so may result in blade damage.

Depending on the material of the blade, the tool may be insulated or not (e.g. some blades are fiberglass). Forged carbon steel is used in TEMCo wire cutter blades.

3. Length of the handle (Leverage)

As the handle length increases, you will be able to apply more leverage and force, and the process will be more straightforward.

4. Insulated versus non-insulated

Although non-insulated cable cutters have insulation, insulated cutters come with an additional layer of insulation. Cable cutters with insulated insulation can be used on live wires, while non-insulated cutters cannot.

The anatomy of dikes tool

  • Jaws (also called nose): This is the end of your pliers that is used for gripping. In addition to having jaws, some combination pliers also include pipe grips and/or cutters.
  • Fulcrum (also called pivot points): The junction between the jaws and handles serves as a point of connection and also creates the force necessary for the pliers to function.
  • Pipe Grips: Pipe grips are oval or round openings in the jaw. This type of grip is designed to hold round objects such as pipes.
  • Handles: These are the parts of the pliers that you hold. These can be straight or curved, and can have a plastic coating or be bare metal.
  • Cutters: Pliers can be used to cut metal and wire. Cutterheads are usually situated near the fulcrum.