Best Table Saws for Woodworking

Best Table Saws. If you are a woodworker, you need an excellent quality saw to work efficiently. There are so many arrays of choice and price range of table saws can get you confused.

Some options are seemingly endless. You cannot just select any of those and hope for the best. Do not always expect to get the best quality that you think you will get. Making a mistake when purchasing one table saw is something you do not want

Sometimes it is not always obvious which features are important for table saws. If you are feeling anxious about a big-money purchase, reading this guide should remove any remaining doubts.

We are trying to educate and provide information to new table saw users about the dos and don’ts to table saw you have chosen. You must choose the best table saw for optimum results and safety.

In this article, we have carefully research and collect some accurate information about table saws. We have come up with this buying guide for table saw users looking for the top table saws. Check out our best table saw comparison and review, so you can make the buying decision easier.

Last update on 2022-09-30 / Affiliate links / Images from Amazon Product Advertising API

Our Quick Overview

  1. Best Jobsite Table Saws: Hitachi C10Rj 15 Amp 10-Inch Table Saw
  2. Best Contractor Table Saw: DEWALT 10-in Carbide-tipped 15-Amp Table Saw
  3. Best Cabinet Table Saw: Grizzly Industrial G0690 10″ 3HP 220V Cabinet Table Saw with Riving Knife
  4. Best Value Portable Table Saw: Bosch 10-in Carbide-tipped 15-Amp Table Saw
  5. Best Budget Table Saw: SKIL 10-Inch Table Saw with Folding Stand 3410-02
  6. Most Popular Table Saw: DEWALT DW745S 15 Amp 10-Inch
  7. Best Cast Iron Table Saw: Ridgid Table Saw Cast Iron R4520
  8. Best Riving Knife Table Saw: Powermatic 1791230K 64B Table Saw
  9. Best for Home Workshop: Jet 725002K ProShop II

Our Top Picks

Primeareviews earns a commission through the affiliate links at no additional cost to you.

What is the table saw?

They are woodworking tools that are generally utilized to cut large panels and sheet goods. They can be plywood or MDF.

A sliding table saw has a sliding table on the left side of its blade. The sliding table saw attached to a folding arm-mounted under a table.

This sliding table saw is used for ripping large materials or cross-cutting.

Types of table saws

1. Cabinet table saw

Cabinet table saws are designed for use by professional woodworkers. They are designed to have a lot of power and to withstand constant daily use.

Their bodies have more steel and cast iron to add to their durability. The feature also means that they have a lower-vibration for cleaner cuts.

These cabinet tables saw have the most significant cut capacities, and have the most massive footprint. For placing this type of table saw, you are going to need a big space with a weight of 600 pounds, or more.


Once a cabinet table saw is assembled, it is not meant to be relocated for the rest of its life. These cabinet table saws have more powerful motors compare to portable or contractor table saws.

Since they have a 3 to 5 hp range of power, they should be provided with a 220-volt circuit instead of a standard wall outlet. You may have to do some re-wiring to get these models working. The best way is to call an electrician for re-wiring.

These saws provide the best cuts compare to other table saws. They offer low vibration, high power, and they are calibrated.

Their fences and miter gauges have higher quality, which means that you can achieve the highest degree of accuracy cutting on cabinet table saws.

2. Contractor table saw

The contractor table saw is better than portable table saws. It was designed for portability but does not have the feature of wheels or folding parts.

The design involves a table saw mounted on a four-legged metal stand. This means the table saw straddles the line between weight and stability.

These contractor table saws have more benefits compared to portable models. The weight can reach 200+ pounds, which means you need one extra person to move them safely.

The significant benefit to a contractor table saw model is that they have much larger rip capacities. Their tabletop is more stable and durable compared to the expanding systems used in portable table saw models.

These models also have more power and more precise compared to portable saws. This is beneficial if you are going to be doing lots of work and require a high degree of precision.

3. Portable table saw

The portable table saw has two variations. The first one is the benchtop.

The benchtop table saw is designed to be operated on top of a bench or a table. They are commonly small in size.

It would not matter which bench or table you put them on. They are light enough to be moved around.

It is meant for construction, but can also suitable in your shop or garage. The benefits of a benchtop table saw are many.

It small and will not take up a lot of space in your shop. It is movable if you need to free up some space.

You can get models with good power for a moderate price.
If you’re only working with smaller pieces, this table saw is your choice. For cutting a lot of large lumber, use another type of table saw.


The second variation of the portable table saw is the wheeled or folding leg table saw. The wheeled table saw come with wheels for mobile operation.

While the folding leg variety may or may not have wheels. But both models have a mechanism that can be raised and used without a table.

They are a bit heavier than benchtop models. Their expanding frames mean that you will be able to utilize them even in places where you do not have access to a bench or table.

This is a good choice for construction work or outside work. They are a little bit bigger than the benchtop variety.

It’s not the one to choose if you are going to leave your table saw indoors because a lot of the value is tied to their portability.

If you’re planning to use your table saw with much mobility, these models are the easiest to move. It does not need a table to run or operate.

Factors to consider when purchasing table saws

1. The space of the table

The tablespace of the table saw will determine what size wood a user can cut. The space of the table merely the table on top of the saw that holds your wood at an even level as it moves or feeds thru the blade.

Table sizes for the smaller folding portable saws are commonly around 19-inches x 22-inches. The table size for a table saw is bigger than the portable saws.

The average table saw size would be around 24-inches x 22-inches. Cabinet table saw sizes are much bigger. The cabinet table saw models are designed to handle multiple extension tables.

The extension will increase their space. A cabinet table saw has a surface of 27-inches x 60-inches or more.

2. Rip capacity

Ripping a wood board is when a user cuts a board in the same direction as the grain of the wood board. The rip capacity of a table saw is defined as the distance between the table saw fence and the saw blade.

A user can rip the larger boards when more distance present. How much rip capacity will depend on what type of wood you will be cutting.

If a user wants to cut wide wood boards or plywood, choose a rip capacity of 24-inches or higher capacity. Some table saw models provide two rip capacities for each side of the saw blade.

All table saws will have a greater rip capacity to the right of the blade.
If you decide to add extension tables or outfeed tables, this will increase the rip capacity of the table saw.

3. Saw blade size

The 10-inches saw blades are the most common size for table saws. There are also 8-inches, 12-inches, and 14-inches saw blades.

Any user can use smaller blades than what the table saw is rated for. However, a larger size saw blade is not recommended.

If you have a 10-inches table saw, you can use an 8-inches saw blade. On the other hand, do not use 12-inches saw blades on a 10-inches table saw.

Blades used on a miter saw and a table saw are interchangeable only if they are the same size. If you own a table saw, and a miter saw, you can buy one same size saw blade for both power tools.

4. The cut depth

The deepest cut depth a table saw can make depends on the size of the saw blade. A 10-inches saw blade can cut 3 inches of wood. The 12-inches saw blade can cut 4 inches deep.

The construction of a table saw can influence the cut depth that the saw can cut. Its blade rising mechanism can affect how high the saw blade will rise. Most tables saw models design the saw to get the maximum height out of them.

Sawdust buildup can influence the cut depth. The rising mechanism can not have its maximum height when you do not clean the sawdust.

5. Table fence option

The existence of a table fence is essential to the table saw, where the alignment of your table fence will determine how accurate your cut will be. Cheaper table saw models come with a setup where the table fence attaches on the backside and the front of the saw. A user clamps the table fence down by a knob or handle.

A better quality table fence on the market is referred to as a T slot fence. These higher-quality fences slide along T slot rails on the front of the saw.

The fence and rails are made up of steel components that ensure stability and sturdiness. These table fences lock using a clamp. They align faster and are more accurate than the cheaper models.

6. Dust collection ability

According to many studies, long-term exposure to sawdust can cause lung cancer and nasal cancer. An outdoor project that uses a table saw may decrease the need for dust collection features.

A lot of table saw models come with dust connections to the table saw. You can take the hose from a shop vac and connecting it to the table saw with a connection adapter.

Older models may not have dust collection features. But, there are aftermarket options available with compatibility that vary by model.

7. Dado blade option

To cut grooves into the wood efficiently what you are cutting, you will need dado blades. These dado blades work by stacking various blades together.

The more blades you add, the wider the groove that is cut into your wood. To accommodate such cutting ability, you need to find a table saw that can handle dado cuts.

Check how wide the table saw will cut. Most table saws that allow a dado set will cut at a minimum of a half-inch wide.

8. The electrical

Most of the table saws are available with 15 amps motor. You can still find those table saw with lower amperage. Standard lower amperages are in the ten amps to 13 amps range.

If you decide to choose the motor lower than 15 amps, the chance is that there is going to have trouble cutting common woods. A 13-amp table saw will have difficulty ripping a 2-inches × 4-inches wood board.

Most contractor table saws and all portable table saws are available or going to be 110 volts. Some higher-quality contractor table saw models might handle the 220 volts and 110 volts.

Make sure that your 220 volts electrical outlet is installed in the shop. Installing 220 volts plugs run can be expensive depending on how far the wires run from your breaker box.

9. The setup

When purchasing a table saw, you need to find the balance between accuracy, power, and mobility. If you want to cut large plywood sheets, you need a separate table saw compared to the table saw that can be moved around to different places (garage, yard, separate house).

a. Stationary table saw

The stationary table saws are for professional and serious woodworkers. These table saws are not going to move around. The table saw can be massive once you begin adding extension tables, is not removable.

Their prices can be more than $1,000 (Home Depot or Amazon) due to their size and the material used to produce them. You can no doubt its accuracy and much more excellent.

b. Contractor table saw

The look of these table saws may vary a bit. A contractor table saw can be mounted to one small cart that has a fixed-legged base and wheels.

These contractor table saws are commonly more considerable than the benchtop table saw to handle more significant cuts.

They are not for contractors. You can use them depending on your needs.

Since it can move around, it is recommended for woodworking or carpentry. These contractor saws will provide you a good balance between mobility, power, and price. Prices start around $600.

c. Benchtop table saw or portable table saw

These portable table saws or benchtop table saws are the smallest in size and the cheapest compared to other categories. They are built for easy carry around wherever they are needed.

The portable table saw tends to be limited in the size of wood you can cut. You may find it unsafe to cut large-size workpieces on them.

These benchtop table saws are not as sturdy as the larger table saw units. Its sturdiness may affect the accuracy and precision of cuts.

There additions that you may add to allow you to make more significant cuts, but these additions will not improve precision or accuracy, or performance.

Prices of portable table saw, or benchtop table saw start at around $250 (Home Depot or Amazon).

10. The extension table

Extension tables are not always available with the purchase of a new table saw. It would be recommended when comparing table saws, and you need to look if a table saw product is built that can add extension tables.

You can easily expand the ability to cut larger workpieces of a table saw by adding extension tables. A user can disconnect the extension table after use and store them properly.

If you are planning to expand your carpentry or woodworking into an area that requires a router, adding an extension table is a feature to consider.

11. The saw stop

Table saws are the most dangerous machines to be used in a woodworker’s shop. You must recognize the dangers that a table saw presented.

To make a product that can reduce the risks of using a table saw, a saw stop works by stopping the blade fast. It will stop the blade in less than five milliseconds.

Once the blade comes in contact with the human skin, a short is made, which will stop the blade. The saw will stop and only cause a minor cut on the finger.

This high-tech safety feature built into the table saw will raise the cost. The price starts at $1,299.

12. Riving knife

The riving knife can prevent the workpiece from moving after being cut. A riving knife that sits behind the saw blade keeps the two cut pieces apart after pushing the workpiece into the blade.

If the workpiece moves towards one another after the cut, it may result in a kickback. A kickback is when the table saw throws the workpiece back at the operator to cause injury. A riving knife is a very important safety feature, so you need to look table saw with a riving knife.

13. Blade guard

A blade guard is one enclosure over the blade to protect operators from moving their fingers or hands into the spinning saw blade. More new table saw models had made the re-attachment and removal of the blade guards quicker and easier. It is recommended not to remove the blade guard from its position.

14. The speed

If you want to look at the speed of a table saw, you need to focus on the rate the arbor spins at. Many table saws have the arbor spins at 4,500 with a 3,500 RPM motor.

One job site saw a 20,000 RPM motor with the arbor spins between 2,500 and 4,500 RPM and variable speed control. A speed controller can be attached to the table saw for variable power. It would be best to look for a soft-start feature to avoid vibrations when you start up the table saw.

15. Miter gauges

To cut 90-degrees and 45-degrees, the table saw needs miter gauges. Since you can use the table saw for straight cuts, these features are rarely used. A miter gauge is very handy when you are trying to cut a different angle.

You need to consider whether you need a miter gauge for your table saw. Most table saws have one. Make sure you check the quality of the miter gauge.

16. The saw blade

a. Triple-chip grind

This type of saw blade tip geometry is a triple chip grind. It is particularly used to cut MDF board, panel materials, non-ferrous metals, and composite materials such as laminated particleboard.

b. Flat-top grind

You can use the flat-top grind to cut efficiently and quickly along the grain. The flat-top grind saw blade lasts a lifetime and durable and long-lasting. It is used for ripping and for general purposes. Its saw blades have teeth that are mounted to the saw plate.

c. Conical

Conical scoring blades work in combination with the panel saw blades. You can adjust the cut to a wider width than the panel saw blade by adjusting the depth of the score. This combination of conical and panel saw blades is commonly used on veneered plywoods and double-sided melamine that fur or chip easily.

d. High alternating top bevel

With this saw blade, the bevels are enhanced and increased. It can offer extra precise and accurate crosscutting and excel at cutting materials that may chip. Its cutting edge is a suitable blade for slicing through melamine with a very clean edge.

e. Combination

The combination blades tooth design can be used on combination crosscut and rip blades. Adding an enlarged gullet after the Raker tip, it is possible to use precision trim saws with enhanced face shears and top bevels for extremely smooth chip-free multi-use cutting.

f. Alternating top bevel

The carbide of the tooth design alternates between the left and right-hand bevel. It can be added to You can add to the varying degrees the corresponding tooth face shears to deliver a sharp edge on the high cutting side. These types of blades are suitable for crosscutting hardwoods and veneered plywoods. If the tooth count is higher, it can provide for a more precise cut. You can also use this design on a rip saw blade to help the blade not follow the wood’s grain.

Best Table Saws Reviews

We researched online to put together the top table saws available on the market today. Combining mostly on consumer reviews and product information, we recommend our favorite products.

Uses of table saws

1. Crosscut

A cross-cut is the most basic type of cut in woodworking. Cross-cutting is the simple practice of cutting against the grain of the wood.

One common application of this is sawing pieces of the board off on end. Cross-cutting is the practice at a 90-degree angle, “crossing” across the wood.

Cross-cuts can be made on all types of saw, but table saws have the capability to create a consistent and measured cut with small effort.

2. Miter cuts

Miter cuts are an example of a common cut type. It is made more accessible by a table saw. Especially when performing multiple miter cuts for several woodworking jobs.

A miter cut can be defined as a cut on the wood at any angle (other than 90 degrees) or called an angled cut. The reason for making miter cuts is to create corners or make edges.

Table saws utilize miter gauges off to the side of the blade. These gauges usually are can be adjusted down and up the slot that operates parallel to the blade.

This gauge has a dial that allows you to angle the woodwork to your exact target angle.

3. Ripping

Ripping wood is one of the most used types of cuts. It involves cutting larger pieces into smaller ones. The operation can take one big piece of sheet or wood, and turn it into multiple smaller pieces for any particular project.

Multiple rip cuts are usually the same size. The setup of a table saw lets for quick and accurate ripping when required.

That is why these saws are popular on woodworking job sites. One user can finish the measurements needed, power on the saw, begin to make quick and efficient rip cuts, and set up the rip fence. It is done when the material is broken down.

Table saw safety accessories

1. Goggles

If you have ever used a saw or table saw, whether it is a manual saw, table saw, or handheld model should know by now that protecting your eyes is not an option. It is a must.

Make sure you always have a good goggle on hand. You should be able to see clearly while wearing safety goggles. They should feel comfortable, as well.

2. Gloves

Hand protection is another vital part of the table saw safety. A glove can protect you from flying debris and loose workpieces.

Gloves also provide you with a better grip, especially when running wood through a table saw.

3. Ear protection

A table saw is loud they are operational. The noise level is still pretty bad. Long-term exposure to the noise can cause damage to your eardrums and hearing ability.

You can protect your ear with ear protection, including earplugs, headphones, and full ear coverings. Choose whatever is the most effective and comfortable for you.

How to maintain a table saw?

1. Rust free maintenance

Rust is the biggest problem for the table saw. But rust is natural to prevent with just a little effort.

Carnauba-based paste wax or car wax is an effective material to keep your table saw free of rust. Use a damp sponge and rub it into the table.

Let it dry. When it is dry, buff it out with a clean cloth.

Add a second coat, make sure it is not gumming up the miter gauge and slots. Do this maintenance once a month.

And not only you have a table free of rust, but the table saw is also smooth that allows the workpiece to glide right along as well. You can use specialized products as well.

2. How to clean table saws

After many months of use, your table saw assembly can get gummed up from debris and dirt. Cleaning the table saw up will let it operate like new. A clean table saw can prevent damage in the future.

Start by unplugging the table saw. Take off the blade, blade guard, and throat plate. Inspect for any resin buildup, clean it off.

Get an air sprayer or air compressor to spray dust out of the gears and crevices. You can use an old toothbrush or steel wool, to scrub off any remaining dirt and debris in the gears.

Use another old brush to apply the car wax in a thin layer.

FAQ about your best table saws

Should I purchase a miter saw or a table saw?

A table saw can create longer cuts, while a miter saw only make short cuts, beveled cuts, and angled cuts. One table saw can create those same cuts if you have a jig.

What’s the difference between a chop saw and a table saw?

Both saws can be utilized to cut bevels into the wood. A miter saw use a blade mounted on an adjustable arm. This blade can tilt to change the angle at which it cuts. While table saw usually keep the blade stationary but tilt the table itself around the blade. This is to change the angle at the spot where you cut.

When would you use a table saw?

The table saw a workhorse of the woodshop. It is the most versatile and productive of all woodworking machines. The tool can cross-cut, rip, miter-cut, square, dado, rabbet, and apply shapes to edges of wood stock.

Common problems of table saws and solution

1. The cut is rough and come out splintery

If you are experiencing tear-out after the cut, there are many potential causes. The issue can be connected with the saw blade sharpness, its feed rate, or the blade speed.

It would be best if you sharpened the dull saw blade. You will have to learn the proper feed rate to blade speed ratio for a particular wood type. Do not underestimate the essence of high-quality saw blades designed for the accurate and precise cut you perform.

2. The blade slow down and bind during a cut

If the saw blade struggles to get through cuts, the issues could be the same as the above issues. You need to sharpen your saw blade, slow the feed rate, lower the blade speed, or combine them.

3. A kickback when making a cut

If you experience the material flying all over the workshop when making simple rips or cuts, the issue is the blade-to-fence alignment. That issue would be confirmed when you follow all of the safety advice from the manual instruction.

You must equip the anti-kickback features such as a riving knife and anti-kickback pawls.

4. Can not run the table saw

The first thing you need to do is to check your power connections. Begin with the plugin, the circuit breaker, the power switch, and even the wall.

You could make mistakes, even experienced woodworkers. The wires can be damaged, the power outlet is not working, and the extension cord’s capability.

Scrutinize every aspect because you may have many factors in your electrical setup. The inspection is better for safety also.

Switch out connections with outlets or power cords to identify a possible faulty piece to the puzzle.

5. The table saw stop in the middle of a cut

This issue may be the inexperience with the cutting material. Stop forcing the workpiece through the cut. You can work wiser by slowing down the blade speed for more torque and power. If you do force the practice, you could hurt yourself or even damage the table saw.

An easy issue would be you accidentally turn on the overload switch. You can begin turning the table saw off, disconnect the power, wait for 5 minutes, plug it again, and start the table saw.

There may also be a lever or button in the wrong location. If you can not solve the issue, it is best to contact certified technicians to find the answer to any table saw troubleshooting issue.

6. Smell the burning while cutting

If you smell it, shut off the power supply immediately, and step back from the table saw. Sometimes it is terrible, and it can also not a severe issue.

One significant cause of the motor malfunction is excessive sawdust or dirt, or debris build-up. This malfunction is the cause of proper routine maintenance is not being executed.

The operation of table saws will produce a lot of sawdust or debris. You may never know how much debris has accumulated around your saw’s fans, junction boxing, shafts, wiring, gears, motor housing, and arbor assembly.

Sawdust gunk and grime can cause serious motor problems. Routine maintenance is the only way to avoid and fix these issues.

Ensure to disconnect the power. Remove the motor housing or flip your portable upside down for clean up.

Never use an air compressor or a shop vac. Use a strong-bristled brush and elbow grease without cleaning chemicals at all.

Check also loose screws, melted wires, torn wires, worn belts, chipped gears, and damaged moving parts.

When you are done cleaning, carefully reassemble the saw, connect the power, and start the table saw. If the smell of burning still exists, turn it off, and it is time to call a certified technician to repair it.

Other components of a table saw

1. Flesh-detecting safety systems

Some table saw models combine electronics and sensors with mechanical injury-prevention systems. This technology was designed to detect human flesh quickly that touches the blade. When the accident occurs, the sensor sends a signal to drop the saw blade to the bottom of the tabletop.

This high-speed action will lower the risk of user injury without damaging the saw blade. After activation, the flesh system can be reset in less than 60 seconds.

With this system, there is a replaceable cartridge that activates the brake mechanism. It can demonstrate the ability to save fingers.

This safety system monitors an electronic pulse in the saw blade without stopping. When the skin comes in contact with the saw blade, the activation changes because the human body is conductive. At a split second, an aluminum brake is activated. Within five milliseconds of sensing flesh on metal, the spinning saw blade is stopped immediately and shutting the motor.

2. The splitter

There is a stationary blade with the same thickness as the rotating saw blade. It is called a splitter and it is mounted behind the rotating blade to prevent a workpiece or wood board from pinching inward into the saw kerf. This motion can prevent potential dangerous kickbacks.

3. Trunnions

In a table saw, the trunnion is the attachment point of the arbor to the underside of the table. It handles the adjustment of angles of the saw blade. The primary function is aligning the saw blade to the miter slot on the top of the saw’s table.

4. The throat plate

Every table saw has removable throat plates. They are made of plastic or metal to easy-to-access the blade for blade changes. They work well for general cutting. These plates provide clearance for the blade to be tipped to an angle.

5. Anti-kickback pawls

They are saw attachments that help reduce kickback during the operation of a table saw. These attachments reduce the risks of equipment damage and injury. The operator can install on the table and radial arm saws. You will have to buy them separately.