Categories
Tools

4 Best 50 Gallon Electric Water Heater 2020 Ultimate Guide

Best 50-gallon electric water heater. When the winter season is just about to come, the holiday season is approaching quickly. It is time to get your water heating system is ready to deliver adequate hot water for the usage of all family members.

If you notice that the current water heater is not running effectively and is taking a long time to heat the water, it is time for you to purchase a new water heater. You may want to find the best 50-gallon electric water heater.


The advantage of purchasing electric water heater

  • The most important advantage of using an electric water heater is the affordable price. Gas-powered water heaters are more expensive, with some models have double the price of an electric water heater unit.
  • The installation cost of a gas water heater can be more expensive — the cost of installation maybe a few hundred dollars more per unit to install.
  • Electric water heaters do not need to be connected to a gas line. Every home has a connection to the electrical grid.
  • Electric water heaters are much safer to use and install. Gas-powered appliances may be hazardous when there are leaks. So it would need extra precautions to be taken when installing gas-powered water heater units. It means it can cost extra money and time. Electric water heaters do not need a similar type of safety measure. There is no need for extra hassles, and extra costs may be avoided.
  • Electric water heaters stand out for consumers because it lasts longer than gas-powered water heater models. Gas-powered water heaters unit need a pilot light to operate, which deteriorates over time. This deterioration needs additional maintenance when compared to electric water heaters.

Factors to consider when purchasing a water heater

1. The type

Before purchasing a new water heater, you have to know the model or the type of water heater. In today’s market, there are two types of water heaters which are tankless model and the storage tank model.

The storage tank model means that there is a reservoir tank for storing water (holding heated water). You have to accommodate some space for the storage tank.

While with the tankless model means that the water heater has no tank for storing the heated water. You will only need minimal space to install the tankless water heater.


2. The size

Forty gallons is the standard size water heater. The water heater unit does not require much space around it to run.

You make sure there is enough space when there is someone to come in and service the water heater. The size of the water heater depends on the hot water needs in the house.

The factor of how much hot water you need must be considered when purchasing a water heater. A large house must need a large water heater to serve all your hot water required.

It would be best if you keep in mind that the bigger the water heater, the more space it will need. A bigger storage-tank water heater would need more space to serve the large tank. You will also need to accommodate a large tankless water heater.


3. Hot water requirement

Consider the number of people in your house. The typical person uses about twenty to thirty gallons of hot water every day.

The FHR (first-hour rating) will help you determine how well the unit will operate during a busy period. See the total BTU load of all of the appliances in your home that is running at the same time, such as the hot tub, the laundry, the dishwasher, and the shower.

The GPM (gallons per minute rating) means that you can determine how many gallons of water can be filled in the tank per minute — the lower volume of water used per minute, the higher of hot water.


4. Energy source

When there is a power supply line, this is the best place to place your water heater. The water heater has to be powered by solar, gas, propane, electricity, or geothermal energy.

The water heater must be placed in a strategic location for easy installation and connectivity.


List of the best 50-gallon electric water heater

1. Rheem MR50245 Marathon Tall Electric Water Heater, 50-Gallon

The Rheem MR50245 Marathon Tall Electric Water Heater has many good reviews from online verified purchasers. Most customers stated that they are happy because they have a unit that will not leak and erode.

They do not have an issue with being exposed to the unpleasant sulfur smell and problems with the deteriorated anode rod. The design is lightweight, and the handling is secure.

This Rheem or Ruud Marathon comes with a high-quality tank, high energy factor EF, and excellent service network from the well-established company.

It comes with a six years warranty for replacement parts. It has the upper heating element that is protected against dry-firing, while the lower element is stainless steel.

The tank is made of lightweight polybutene, a seamless, blow-molded, and does not leak. Its high-efficiency energy factor is 0.94, with losses only 5-degree Fahrenheit of heat in 24 hours.

When running, the delivery rate is 20 GPH, but in the first hour, the delivery is 61 GPH. The water heater requires less maintenance involved, no hydrogen gases, and no rotten egg odor.

The will be no rust, no corrosion with the non-metallic water tank. The bowl-shaped bottom will let you drain the water completely.


2. Westinghouse WER052C2X055N06 Electric Water Heater with Durable 316L Stainless Steel Tank, 52 gallon

This Westinghouse Electric Water Heater with Durable 316L Stainless Steel Tank, 52 gallons is a durable and reliable electric water heater. The electric water heater comes with many features, including:

It comes with a stainless steel tank that eliminates the need for the anode rod, corrosion, hydrogen sulphide gas, development of bacteria, rotten egg odor, and the scale build-up. The whole water heater is insulated with heavy-duty insulation to keep the heat inside for more savings.

You can handle it securely due to its lightweight design. The tank capacity is 52 gallons that can serve hot water for four to five people and can supply one to two bathrooms.

All of the electric heating components are made of high-grade stainless steel. That makes these components a low watt density, durable and resistant to corrosion and hard water effect.

You can install the water heater easily because the water connections are located at the top of the water heater unit. This water heater model from Westinghouse can deliver long draws of hot water, with the first-hour delivery is around 84 GPH.

The hot water delivery makes it saves money and time. The water heater comes with a limited lifetime warranty to make sure many years of high performance of water heating.


3. A.O. Smith ENS-50 ProMax Short Electric Water Heater, 50 gallons

The A.O. Smith ENS-50 ProMax Short Electric Water Heater can deliver excellent quality and value. The production of this water heater meets the energy efficiency requirements by the Department of Energy (NAECA).

It is also qualified for most utility rebate programs, and it is equipped with long-lasting low-watt density copper heating elements, certified T&P relief valve, and Permaglas glass coating that protects from corrosion.

The tube of the water heater is the Dynaclean dip tube that can lower sediment and lime buildup for many years. You can choose between many of installation choices such as lowboy, short, and tall models.

The water heater is durable, with tamper-resistant brass drain valve.


4. A.O. Smith PNS-50 ProMax Short Electric Water Heater, 50 gallons

You can quickly install this A.O. Smith PNS-50 ProMax Short Electric Water Heater. It comes with an installation manual and user guide.

The water heater can deliver a reasonable rate and is durable. The price is affordable and has an excellent value for money.

This electric water heater provides the best qualities of a water heater but at a much lower price. It is equipped with 5500-watt dual heating elements, PEX cross-linked polymer diffuser dip, stainless steel construction, stainless steel anode rod, and non-CFC insulation.

The water heater by A.O. is an efficient and very environment-friendly water heater.


What you should know about water heater

1. The time for a replacement

All water heaters will provide a sign when they require to be replaced. If your water heater is about seven years old, the Department of Energy recommends that you should purchase a new water heater.

If you see the water heater is leaking, you should consider buying a new one. If you are not getting as much hot water out of it compared to its original condition, the water heater gives a sign of failure.

You should replace your water heater if the water heater is producing noisy operation, slow recovery, calcium buildup, and your water heater does not produce any hot water at all.

A water heater could last from ten to fifteen years with regular maintenance.


2. The efficiency

Water heating will contribute to about fifteen percent to twenty percent of your energy bill. The Department of Energy stated that an average household spends from $400 to $600 every year on hot water, and use sixty-four gallons every day.

A high-efficiency water heater is very crucial because it decreases the amount of energy you use. Reduce the amount of energy means lowering your energy costs.

Each water heater is given an Energy Factor. It is a calculation of the efficiency of a water heater when running for 24 hours.

The Department of Energy counts the Energy Factor by operating a simulated use test on each model of the water heater. A water heater with a higher Energy Factor rating uses less energy.

The best and easy way to make the water heater efficiency is to keep it regularly maintained. Regular maintenance will increase the lifespan.


How to maintain your water heater

1. Inspect the anode rod

Find the tank’s drain cock. Put a hose to it and let out a 1 gallon of water.

Fit one 1/16-inch socket onto the rod’s hex head under its top plate and unscrew the rod. If it is less than half-inch thick or it is coated with calcium, buy a replacement.

If you have the replacement, wrap the threads with Teflon tape. Put the replacement back in the tank, and tighten tightly.


2. Drain and wash out sediment from the tank

Drain all of the water in the tank. Stir up the sediment on the tank’s bottom by opening the water supply valve.

Drain and repeat the practice until you see only clean water comes out of the hose. Close the drain cock, and refill the tank with water, and turn its power back on.


3. Temperature adjustment

Please search for the temperature dial on the side of the tank. When you find it, start unscrewing its cover.

Get a flathead screwdriver and adjust the dial to 120 degrees with it. For every ten degrees, the temperature is lessened. This lessening will save about five percent of energy costs.

Turn the thermostat down to the lowest setting whenever you go away from home.


4. Heater insulation

Purchase and cut an insulating blanket. Make sure the cut is to fit around the TPOR value, the temperature control, and pipes of the tank.

Wrap the side of the tank with the insulating blanket, and using a foil tape seal cuts the wrapper. Never cover the tops of gas or oil water heaters.


5. Drain the tank

Drain the tank about four to six times per year to get rid of sediment and debris. Do this by turning off the cold water supply.

Drain the water out of the tank until the water is clear. If you see the cloudy water remain to be seen, open the water supply valve again and drain the tank again.

By cleaning the sediment will make the unit run more quietly.


By Henricus Bismo

I graduated from the University of Indonesia majoring in Information Technology. I enjoy writing reviews of many products because it gives me excitement and inspiration.