2.4 Ghz Bandpass Filter

2.4 Ghz Bandpass Filter. We do the research ourselves by analyzing reviews and ratings from customers, to help you purchase wiser to avoid buyer’s remorse. please choose them wisely

Table of Contents show

Our list of the 2.4 Ghz Bandpass Filter


Portable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function

$109.99
$84.99
 in stock
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer.
  • 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration.
  • 【Tiny Spectrum analyzers & ESD Function】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life.
  • 【PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
  • 【Package List】1x Tiny Spectrum Analyzer; 2 x 20cm RF Cable;1 x USB Cable;1 x SMA Female to Female Connector;1x Touchscreen Pen;1 x SMA Telescopic Antenna.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.The firmware of the tinySA can be updated by the user. New versions of the firmware needed please contact seller for download link.

Anncus 2.4GHz 2450MHz RF coaxial bandpass Filter/SMA for WiFi Bluetooth Zigbee Signal

$66.49  in stock
Amazon.com
as of January 12, 2022 7:09 pm

Features

Part NumberACS-C4B575C6738168846AF49F17DAEADF14

Tool Parts 915MHz RFID receiver dedicated bandpass filter, 902~928MHz, SMA interface

$39.03  in stock
4 new from $39.03
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • Model number: FBP-915s
  • Type: Hand Tool Parts

RF Filters, Bandpass Filter 2320~2370MHz Low Loss 50Ohms Impedance Dedicated for 2.4GHz Receiving Equipment

$37.19  in stock
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • EXCELLENT SUPPRESSION: Filter still has excellent suppression of out of band remote signals, and performance is far superior to products made with bare PCB boards
  • SMA‑M AND SMA‑F INTERFACE: Possess 50Ohms impedance, center frequency is 2345 MHz, passband from 2320~2370MHz, using interface for SMA‑M and SMA‑F
  • LOW IN BAND INSERTION LOSS: This filter has low in band insertion loss and steep cut off characteristics, and dedicated to the performance optimization of 2.4GHz receiving equipment
  • ALUMINUM ALLOY SHIELDED SHELL: Use aluminum alloy shielded shell, non interference, no out of band spurious response, compact and sturdy, easy to use
  • EFFECTIVELY FILTER: Effectively filter out of band signals, reduce noise and increase dynamic range

Bandpass Filter, SMA Interface Coaxial Filters Low Loss 50Ohms Impedance for 2.4GHz Receiving Equipment

$36.99  in stock
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • SMA‑M AND SMA‑F INTERFACE: Possess 50Ohms impedance, center frequency is 2345 MHz, passband from 2320~2370MHz, using interface for SMA‑M and SMA‑F
  • ALUMINUM ALLOY SHIELDED SHELL: Use aluminum alloy shielded shell, non interference, no out of band spurious response, compact and sturdy, easy to use
  • EFFECTIVELY FILTER: Effectively filter out of band signals, reduce noise and increase dynamic range
  • LOW IN BAND INSERTION LOSS: This filter has low in band insertion loss and steep cut off characteristics, and dedicated to the performance optimization of 2.4GHz receiving equipment
  • EXCELLENT SUPPRESSION: Filter still has excellent suppression of out of band remote signals, and performance is far superior to products made with bare PCB boards

Coaxial Filters, Low Loss Non Interference Saw Bandpass Filter SMA Interface for 2.4GHz Receiving Equipment

$36.69  in stock
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • SMA‑M AND SMA‑F INTERFACE: Possess 50Ohms impedance, center frequency is 2345 MHz, passband from 2320~2370MHz, using interface for SMA‑M and SMA‑F
  • EXCELLENT SUPPRESSION: Filter still has excellent suppression of out of band remote signals, and performance is far superior to products made with bare PCB boards
  • LOW IN BAND INSERTION LOSS: This filter has low in band insertion loss and steep cut off characteristics, and dedicated to the performance optimization of 2.4GHz receiving equipment
  • EFFECTIVELY FILTER: Effectively filter out of band signals, reduce noise and increase dynamic range
  • ALUMINUM ALLOY SHIELDED SHELL: Use aluminum alloy shielded shell, non interference, no out of band spurious response, compact and sturdy, easy to use

Coaxial Filters, Low Loss 50MHz Bandwidth Bandpass Filter SMA Interface 2320~2370MHz Non Interference 50Ohms Impedance for 2.4GHz Receiving Equipment

$34.19  in stock
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • LOW IN BAND INSERTION LOSS: This filter has low in band insertion loss and steep cut off characteristics, and dedicated to the performance optimization of 2.4GHz receiving equipment
  • ALUMINUM ALLOY SHIELDED SHELL: Use aluminum alloy shielded shell, non interference, no out of band spurious response, compact and sturdy, easy to use
  • EXCELLENT SUPPRESSION: Filter still has excellent suppression of out of band remote signals, and performance is far superior to products made with bare PCB boards
  • EFFECTIVELY FILTER: Effectively filter out of band signals, reduce noise and increase dynamic range
  • SMA‑M AND SMA‑F INTERFACE: Possess 50Ohms impedance, center frequency is 2345 MHz, passband from 2320~2370MHz, using interface for SMA‑M and SMA‑F

SiliconDust LPF-608M LTE Filter for TV Antennas USA 2020 Standard 600/608/618MHz

$19.99  in stock
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • Blocks LTE signals that interfere with TV reception
  • Pass band to 608MHz supporting all USA TV channels
  • Attenuates 618MHz and above to block the new "600MHz" LTE band introduced in 2020

Broadcast FM Block Filter (88 - 108 MHz Block) by RTL-SDR Blog

$16.95  in stock
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • Blocks the broadcast FM band between 88 – 108 MHz with over 50dB of attenuation.
  • Insertion loss is less than 0.5 dB between 0 – 1 GHz, and mostly less than 1.5 dB between 1 – 3 GHz.
  • Uses SMA female connectors. Comes with a free SMA male to SMA male adapter.
  • Designed for SDR and radio scanner users. TV installers this is probably not the right product for you. TV installers please read the description carefully to avoid disappointment.

Flamingo AM - Broadcast AM Bandstop Filter (AM Notch Filter) for Software Defined Radio (SDR) Applications

$15.95  in stock
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • A high-quality, high-performance broadcast AM bandstop filter designed for software defined radio (SDR) applications. Includes free male SMA-male SMA barrel connector! Designed and manufactured by NooElec in North America. Impeccable quality and full 2-year warranty
  • Broadcast AM stations can be particularly problematic due to the high-powered transmitters used for broadcasting in some areas. These signals can overload the front end of an SDR, causing imaging and a number of other issues. As such, Flamingo AM makes a great companion to our Ham It Up series of HF upconverters (available separately on Amazon)
  • Flamingo AM was designed to provide approximately 40dB attenuation for broadcast AM frequencies, while ensuring that adjacent bands are minimally affected. The -3dB rolloff of the filter is 350kHz and 1900kHz. The minuscule out-of-band insertion losses means the filter can stay in place for most any application--though we do recommend removing Flamingo AM from the signal chain when not receiving HF frequencies
  • Flamingo AM is a proper bandstop filter, so you are able to pass-through DC (bias-tee) power when required. DC current handling is 250mA (min), and the maximum recommended signal level is 18dBm (5Vp-p), so there is no issue using the filter for higher-power applications
  • The filter is fully EMI shielded, installed in a custom anodized aluminum enclosure for further protection and isolation. The front end is protected by an RF-rated ESD diode, which provides protection not just for your filter, but also the radio or SDR behind it

D DOLITY Durbale 2.4GHZ Microstrip Bandpass Filter High Performance 70x40x20mm//2.76x1.57x0.79"

$10.99  in stock
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • * S21>-3.6dB;
  • * S22
  • * This band-pass filter can filter out clutter signals other than 2.3-2.5GHZ, which can improve the signal-to-noise ratio. For example, before amplifying WIFI, ZIGBEE, Bluetooth and other signals, add this filter to filter out the clutter signal, and then send it to the low-noise for signal amplification, which can greatly improve the reliability of signal transmission and increase communication. distance.
  • * S11
  • * Size:Approx.70x40x20mm/2.76x1.57x0.79inch

Eujgoov 2.4GHz Bandpass Filter Module, 1.6mm Thick WIFI Bluetooth Microstrip Signal Filter Double-Sided Printed Circuit Board Electronic Component

$10.89  in stock
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • 【FUNCTION】: This filter module can filter the clutter signal beyond the frequency to have the received signal cleaner.
  • 【WIDE FILTER RANGE】: The filter range is 2.3-2.5GHz, and the wide filter range ensures stable and reliable signal receiving.
  • 【LONG SERVICE LIFE】: Using 1.6mm thick double-sided printed circuit board, very durable for long-term use, not easy to break.
  • 【PERFECT IN WORKMANSHIP】: One‑piece moulding promises no burrs on the smooth surface, so the installation is very simple and quick.
  • 【EXCELLENT PERFORMANCE】: Adopting the whole process of spraying tin, both both large and small currents can easily pass the module.

Longzhuo Bandpass Filter Module, Microstrip Signal Board 2.4GHz Accessory Electronic Component

$10.50  in stock
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • This filter module can filter the clutter signal beyond the frequency to have the received signal cleaner.
  • The filter range is 2.3-2.5GHz, and the wide filter range ensures stable and reliable signal receiving.
  • Using 1.6mm thick double-sided printed circuit board, very durable for long-term use, not easy to break.
  • One‑piece moulding promises no burrs on the smooth surface, so the installation is very simple and quick.
  • Adopting the whole process of spraying tin, both both large and small currents can easily pass the module.

kesoto 2.4GHZ Microstrip Bandpass Filter Improve Reliability of Signal Transmission

$9.98  in stock
2 new from $9.98
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • Size:Approx.70x40x20mm/2.76x1.57x0.79inch
  • S22
  • S11
  • S21>-3.6dB;
  • This band-pass filter can filter out clutter signals other than 2.3-2.5GHZ, which can improve the signal-to-noise ratio. For example, before amplifying WIFI, ZIGBEE, Bluetooth and other signals, add this filter to filter out the clutter signal, and then send it to the low-noise for signal amplification, which can greatly improve the reliability of signal transmission and increase communication. distance.

LTE Filter Improves TV Antenna Signals-Filters 4G /5G LTE for Antenna Signal to Reduce Interference for Clear Digital HD TV Reception

$9.95  in stock
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • TV antenna Lte Filter -Our LTE filter improves the TV signal by filtering out mobile phone signal interference (3G/4G/5G), which may cause intermittent TV signal interruption, TV picture loss or complete interruption.Only TV signal frequencies between 5-699MHz are allowed to pass.
  • Easy to Use -The inch F head can be matched with any TV, amplified TV antenna, splitter, just twist it in gently, without any tools and power supply. easy and convenient.
  • Recommendation -If you have a lot of wireless signal sources, cell towers, mobile devices, radar stations, electric magnetic fields nearby, these signal sources will seriously interfere with your TV signal, then this LTE filter will be particularly useful.
  • Warm reminder: This compact filter is suitable for any indoor and outdoor antennas, but for the convenience of installation, we recommend installing process (TV-LTE filter-amplifier-antenna)
  • 100% Satisfaction - We genuinely care about providing a premium product and best service.If you have any concerns, simply contact us and we'll make it right.

Bingfu Dual Band WiFi 2.4GHz 5GHz 5.8GHz 6dBi RP-SMA Male Antenna 15cm 6 inch U.FL IPX IPEX to RP-SMA Female Pigtail Cable 2-Pack for WiFi Router Wireless Mini PCI Express PCIE Network Card Adapter

$8.99  in stock
1 used from $8.63
Free shipping
Amazon.com
as of January 12, 2022 7:09 pm

Features

  • Dual Band WiFi: 2.4GHz (2400 - 2485 MHz),5GHz/5.8GHz (5150 - 5850 MHz); Gain: 6dBi; Direction: Omni-directional; Antenna Connector: RP-SMA Male Connector; Accessories Cable: 15cm IPX IPEX U.FL to RP-SMA Female Bulkhead Mount 1.13mm Coaxial Pigtail Cable;
  • Package List: 2 x WiFi Antenna, 2 x Coaxial Pigtail Cable, Notice: This IPEX IPX U.FL pigtail cable only use for Mini PCI-E interface network cards, can not fit M.2 NGFF interface network cards, please check your network cards before purchasing.
  • The Accessoried IPX U.Fl Coaxial Pigtail Cables are Compatible with Most Laptop and Computer Mini PCI Network Card and Most Computer Motherboard that Built-in WiFi Network Card with U.FL External Antenna Connector Interface.
  • Compatible with: Wireless Network Router, WiFi AP Hotspot Modem, WiFi USB Adapter, Desktop PC Wireless Mini PCI Express PCIE Network Card Adapter;
  • Compatible with: WiFi IP Security Camera; Wireless Video Surveillance DVR Recorder; Truck RV Van Trail Rear View Camera, Reverse Camera, Backup Camera, Industrial Router IoT Gateway Modem, M2M Terminal, Remote Monitoring and Control, Wireless Video, Wireless HDMI Extender;

As an Amazon Associate, We earn a small commission from qualifying purchases at no added cost to you.

New products list:

Last update on 2022-01-03 / Affiliate links / Images from Amazon Product Advertising API


Last updated on January 12, 2022 7:09 pm

As an Amazon Associate, We earn a small commission from qualifying purchases at no added cost to you.

What to consider before purchasing the 2.4 Ghz Bandpass Filter.

For a few countries like the United States of America, the customers prefer to purchase many varieties of products from Amazon.
Amazon supplies a variety of products with credible platform.
Buying form Amazon is like buying directly from the manufacturer.

Amazon.com works as a third-party and tied with manufacturers worldwide.
Amazon describes 2.4 Ghz Bandpass Filter products with a clear explanation provided by its manufacturer. These information can help shoppers make the right decision easier.

The guide provides information about the specifications of the 2.4 Ghz Bandpass Filter you want, such as its pros, features, size, function, and brand.
If shoppers want a 2.4 Ghz Bandpass Filter with any specific features, purchasing from Amazon is the best location or platform.
A list of products will appear on your laptop or monitor or Android phone as soon as you type in the features you prefer.

Choosing The Right 2.4 Ghz Bandpass Filter

1. Select the right spec. Browse through the category at Amazon, and you will see a whole host of specifications.
As a useful shortcut, just look at the prices. It will often tell you which products are more reliable or durable or powerful than others. It helps to know a little bit about what you are dealing with.

2. Look at customer satisfaction. See which products has the best rating. The best rating (usually between 0-5 or 0-10 scale) can help you understand how the product performed according to customer’s review.

3. Check the brand or manufacturer score. Less known manufacturer or brand tends to provide lesser quality product. Overtime, customers will provide feed backs which product performed the best.

4. Customer reviews. It would be the most important factor to consider. Customers leave feedback regarding their experience with the best 2.4 Ghz Bandpass Filter they purchased from Amazon.
Every single review posted, it will help you to know whether the best 2.4 Ghz Bandpass Filter you want to buy good or bad.

We hope our recommendation can help.

———————————-

PrimeaReviews is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
As an Amazon Associate, We earn a small commission from qualifying purchases at no added cost to you.